Supplies for Glass Fusing and Slumping
Kiln Wash Separator
A High temperature, low fluxing clay and
aluminum mixture in a special formulation. Contains suspension agents, that when used correctly, will be the best insurance that your
fused work will not stick to the shelf. Coat kiln shelves and all surfaces that would come in contact with glass.
How to apply kiln wash, separator, shelf primer.
| Order # | Brand | Qty | Price |
|
4819 Hot Line Shelf Primer |
24 OZ |
$7
|
|
48195 Hot Line Shelf Primer |
5 Pounds |
$15
|
|
48321 Hot Line-Hi Temp We recommend that you use this High Temperature Kiln Wash ONLY if you are doing an extra hot firing like raking. Do NOT use for normal fusing projects. |
24 Oz |
$7
|
|
483215
Hot Line-Hi Temp We recommend that you use this High Temperature Kiln Wash ONLY if you are doing an extra hot firing like raking. Do NOT use for normal fusing projects. |
5 Pounds |
$15
|
|
48235 PRIMO PRIMER |
24 Oz |
$13
|
|
48230 PRIMO PRIMER |
5 Pounds |
$29
|
|
8220 Bullseye Glass Primer - List $29 |
5 Pounds |
$24.95
|
 |
ZYP Click here for more information about Boron Nitrate |
13oz. spray can |
$44.00 |
Fired on Decal Paper
For the first time, home hobbyists, professional studios, schools and artists can easily, safely and inexpensively fire high quality photographs, graphics and text onto their fused glass projects.
For more information Click Here| Item | Description | Price |
|
Book/ Fusing Images on Glass/ 2nd Edition: Item Number 79082 For more information Click Here |
List Price: $19.95 Our Low Price: $17.95
|
|
Fired-On Photo Fusing Decal Paper: Item Number 79081 10 sheets - 8" x 10" Prints on any HP or Canon B+W laser printers For more information Click Here |
List Price: $19.95 Our Low Price: $17.95
|
Thin Fire" Shelf Paper
Wow! No more coating kiln shelves. Simply use scissors to cut out a size to fit your kiln shelf, place glass and fire! This "Thin Fire" shelf pape leaves a smoother finish on the back of the glass than shelf primer! One time use. It has the annoying feature of rising up off the shelf in the uncovered areas and sometimes curling back on to your glass piece. Weigh down the uncovered areas with kiln posts or scrap glass.
| Order # | Thin Fire Shelf Paper: Sheets | Minimum order | Price |
| TF20 | Thin Fire Paper - 21" x 21" sheet | 4 sheets |
$3.50
Per sheet
|
| TF20100 | Thin Fire Paper - 100 sheet pack | 1 pack |
$200
Per pack
|
| Order Number | Thin Fire Shelf Paper: 10ft Rolls | Minimum order | Price |
|
TF1007 - Thin Fire 7" wide x 10ft long roll. |
1 Roll |
$10
Qty:
|
|
TF1009 - Thin Fire 9" wide x 10ft long roll. |
1 Roll |
$12
Qty:
|
|
TF1012 - Thin Fire 12" wide x 10ft long roll. |
1 Roll |
$16
Qty:
|
|
TF1013 - Thin Fire 13" wide x 10ft long roll. |
1 Roll |
$17.00
Qty:
|
|
TF1016 - Thin Fire 16" wide x 10ft long roll |
1 Roll |
$22.00
Qty:
|
|
TF1018 - Thin Fire 21" wide x 10ft long roll |
1 Roll |
$24.00
Qty:
|
| Order Number | Thin Fire Shelf Paper: Full Rolls | Minimum order | Price |
| TF25007 |
Thin Fire - One full roll - 7" by 250 feet long This Roll is 20% off the list price! |
1 Roll |
List
Price $157 Our Price $126
|
| TF25009 |
Thin Fire - One full roll - 9" by 250 feet long This Roll is 20% off the list price! |
1 Roll |
List Price $203 Our Price $162
|
| TF25013 |
Thin Fire - One full roll - 13" by 250 feet long actual width is a little less than 13" by about 3/8" This Roll is 20% off the list price! |
1 Roll |
List Price $293 Our Price $220
|
| TF25016 |
Thin Fire - One full roll - 16" by 250 feet long actual width is a little less than 16" by about 3/8" This Roll is 20% off the list price! |
1 Roll |
List Price $361 Our Price $252
|
| TF25020 |
Thin Fire - One full roll - 20-1/2" by 250 feet long This Roll is 20% off the list price! |
1 Roll |
List Price $462 Our Price $277
|
| TF25041 |
Thin Fire - One full roll - 41-1/2" by 250 feet long This Roll is 20% off the list price! |
1 Roll |
List Price $925 Our Price $508
|
**Note: the 41" roll needs to be shipped in a long box - often in it's own box if ordered with other items - this will incur additional shipping charges
Click Here
to see more Fiber Paper and Blanket Products
Super Spray Over glaze
A clear, low-melting glass suspended in a spray medium. This material is applied to fused projects when they are ready for firing to prevent devitrification on the glass surface.
Super Spray
Prevents surface divitrification on kiln fired glass. Ultra low melting glass suspended in a solution compatible with most glass. 99% lead-free. Has been proven safe for food-bearing surfaces. Can be used on dichroic or irridized surfaces. Will not discolor reds, oranges or other sensitive colors.
| Order # | Description | Qty | Price |
|
Super Spray #4827 |
8 Oz. |
$22.46
|
 |
Super Spray #4827Q |
32 Oz. |
$53.10
|
Etching Cream
A fast acting specially formulated glass etching compound that lets you create permanently etched designs on windows, mirrors and household glassware. You can create your own custom glass etching stencil or use a pre made stencil. This unique glass etching product allows anyone to personalize and decorate glass or mirrors in minutes with no previous experience. Try it, you will love it. Not intended for use by children. Will NOT etch Pyrex (COE33). NOT recommended for etching large solid areas of glass.
| Order # | Description | Price |
| ETCH3 | Etching Cream - 3 oz. |
$7.95
|
| ETCH10 | Etching Cream - 10 oz. |
$15.99
|
Squeegee Oil
This is a medium used to apply enamels and fine frits, acting as an adhesive that burns off at a relatively low temperature. Apply oil to selective areas, sprinkle frit or powder on the glass, the frit sticks just to the oil areas, the rest of the frit is easily removed leaving frit in your design pattern.
| Order# | Description | Qty | Price |
|
Squeegee Oil #48251 |
8 Oz. |
$19.00
|
Bending Glaze
Matures at 1100°. Can be brushed or sprayed onto surface of glass or on ground edges to prevent Devitrification during the slumping cycle. Ideal for single layer bending. NOT safe for food bearing surfaces!
| Order # | Description | Qty | Price |
| #4847 |
Bending Glaze |
4 Oz. |
$27.00
|
Wash-Away
Easily removes baked-on shelf primer (kiln wash) from the bottom of fused projects, like black glass, hot colors and opalescent glass. Apply without dilution to the baked-on primer and then lightly scrub with a plastic scouring pad. This should remove even the most stubbornly adhered primer.
| Order # | Description | Qty | Price |
|
Wash Away #522010 |
8 OZ |
$6
|
Fusing Gel
GlasTac GelMeet the new go-to holding agent: GlasTac Gel. This thicker version of our regular GlasTac has a “tackier" feel but still burns out cleanly
- Holds its applied shape well (you can also apply it with a paintbrush)
- Makes calligraphic powder lines easy
- Stays sticky longer (more working time before it dries)
- Tacks sheet to sheet with great holding power so you can move projects sooner
- Great for children’s projects
| Order # | Qty | Price |
| 8244 | 4 Oz. |
$6.95
|
| 82432 | 32 Oz. |
$19.50
|
Fusing Glue
GlasTac Glue Lightly tacks glass pieces in place prior to firing:- Slow drying and pliability allows readjustments as you work
- Organic colourant lets you see where you've put it on clear glass but it burns out once fired
- Use sparingly
- Water soluble
- Easy to use 4 fl oz (120ml) applicator bottle or a large refil 32fl oz bottle (950ml).
| Order # | Qty |
Price |
| 8234 | 4 Oz. |
$6.95
|
| 8232 | 32 Oz. |
$19.50
|
Glass Glue
E6000 Glue - Great glue for glass to glass. Also Great for gluing metal jewelry findings to fused glass, like barrettes or pins. Has a rubber consistency. Feels and works like Clear RTV (silicone rubber).
| Order # | Qty |
Price |
 E600018
|
.18Fl. Oz. |
Buy one pay $2.00 ea. Buy 12 or more pay $1.65 ea.
Qty:
|
CMC
Used for many purposes. A common usage is to apply a thick line of powdered frit mixed with CMC using an applicator bottle. This is described in Richard LaLonde's Book by his name. Safe - it's a food additive. You can see it on the list of tortilla ingredients.
Click Here to see Richard LaLonde's book
| Order # | Qty | Price |
| 48260 |
2 oz by weight (for idea of the volume - fits in a 4 fl oz jar) |
$5.75
|
| 48261 | 1 pound |
$34.00
|
Directions:
- Add 1 tablespoon CMC to 2 cups distilled water (a little bit goes a long way)
- Don't forget to always wear a mask when working with any powder
- Stir and let sit overnight
- To create a "glass clay" add powdered glass to the mixture
- Fill a squeeze bottle with this "glass clay"
- Now squeeze out a line . You can effectively "draw with it"
- If it's too thick and won't come out of the bottle easily just add some water
- Too thin the drawn line will flow and flatten and won't hold its shape or height - just add more powder
Bubble Maker
Create bubbles in your glass. Sprinkle even a TINY amount between layers of glass, fire and magically bubbles will form. A bit hard to control the size of bubbles. A little bit goes a long way. Non toxic.
- Item # 8233
- Powder in a 2 Fl Oz container
- $4.50
Gold, Silver, and Palladium
Very thin squares of the real thing. Don't be fooled with the commonly available inexpensive leaf that is only colored aluminum. Place small pieces of this metal on your graphite marvering pad and roll your bead across it to pick it up. Be careful, the direct flame will melt away the metal. Cover the metal with dabs of transparent glass. Approximate Sheet Sizes are 3-3/8" to 3-3/4" Square.
| Order # | Metal | # of sheets | Price |
| Copper | |||
| 12700 | Copper Leaf (very thin) sheet size 5-1/2" sq. | 25 |
$9.50
|
| Silver Leaf | |||
| 16502 | Silver Leaf (very thin) | 25 |
$19.50
|
| 16503 | Heavy Silver Leaf (medium thickness) -a thin Foil* | 25 |
$25.50
|
| Gold Leaf | |||
| 16501 | Gold Leaf 22Kt Very Thin | 25 |
$74
|
| 16522 | Gold Leaf 23Kt Medium Thick** | 10 |
$88
|
This is actually Heavy Leaf or Thin Foil **Average weight of 65g/1000 leaves The 16522 leaf is used in the pictures. You can see that a single layer shows well. This glass was fully fused to 1500°F.
Copper Foil Sheet
Copper foil is a great way to incorporate designs inside of fused glass projects. This thin foil is easy to cut with scissors. Seems to work with wide variety of glass. Does not work on top of the glass - must be placed between layers of glass. Copper will darken due to oxidation.
| Metal | Order. No. | Thickness | Size | Price |
| Copper Foil Sheet | 12701 | .002" | 2" x 50 ft. |
$55
|
