Glass Fusing Kilns
|
2309 Glass Fusing Kiln - Elements are actually in the lid, not the sides - $970 |
Specifications
Overall Height | Outside Dimension | Inside Height | Dimension of kiln floor | Ship Weight |
Largest kiln shelf |
Volts/Amps |
15" |
28" x 30" with 3" electrical box on one side |
9" |
23½" 10 sided |
200 lbs |
21" 10 sided |
240 Volts 38.2 amps with lid element |
If you want to ANNEAL your glass, you
mut be able to read the temperature of the kiln! You must
select from one of the 3 temperature reading devices below.
PA1 | Pyrometer - large face gauge - details | $69 |
2242 | Pyrometer - digital - details ....Regular price $89 | $79 |
DTC1000 | Controller - Fully automatic and digital, by Paragon - (Pyrometer is not needed - it is built into this digital controller) - details | $615 |
Power requirements
This kiln uses 220 volts at 16.2 amps. (or 23.1 amps if you choose to have an element in the lid.) This power can be found near your clothes dryer plug. Most clothes dryers use 220 volts, 30 amps. Make an adaptor to go between the dryer plug and the kiln plug or have an electrician install an outlet that fits this kiln plug.
Controls for this kiln
A dial heat infinite control switch (ICS) is included with each kiln. Click here to see how to use the ICS. A pyrometer to measure temperature is not necessary for glass fusing but can be purchased separately. For convenience, order a digital controller. The Paragon digital controller will do 4 things:
- Heat the kiln slowly at a constant rate of increase.
- Turn off the kiln when it reaches your selected temperature.
- Hold the kiln at a desired temperature for a period of time and then turn off automatically.
- Start heating the kiln at a future time. Example start the kiln at 3 AM so you can watch the final stages of fusing before going to work at 7 AM.
What this kiln is made of
Kilns are made with insulating fire brick wrapped with stainless steel sheetmetal. What we like about the AIM kilns is the reinforced steel structure which hold the hinged lids. Many other brand kilns do not have this feature. All kilns should be kept 12" from any flammable materials.
What else can I use this kiln for?
These kilns can also be used for ceramics, copper enameling, or many different uses. It will heat to 2000 degrees F.