Gas Equipment

Click Here to see our Oxygen Concentrators (Oxygen Generators)

Gas Regulators

Two regulators are required when you use a two gas, (oxygen and propane) torch like a Minor Burner. They fit between the gas tanks and the gas hose. None are needed if you are using the Hot Head torch.

Click Here for an important choice you need to make

Item#	Gas	Description	Price
REB93	Oxygen	Two gauge. One Stage - Click Here for warranty. Inlet CGA 540. Outlet male "B" fitting	$69.00
REB11	Propane	Two gauge. One Stage - Click here for warranty. Inlet CGA 510. Outlet male "B" fitting	$69.00

The fastest way to order any of these items is to call us toll free at 1-888-4HOTGLASS.

Gas Hoses

Use this hose when you use a two gas torch (oxygen and propane) like a Minor Burner. To attach torch, push the cut ends onto the torch and secure with a hose clamp. These hoses have two attached hoses, one for oxygen and one for propane. The brass end of the hoses are attached to the gas regulators. Propane hose fittings are left handed threads and colored red and oxygen is right handed and colored green - This prevents a mix-up when attaching hoses.

CAUTION Do not use the easy to find oxygen/acetylene type hoses. The propane gas will rot them. The hoses we sell are made for all types of gas including propane. Hose ends have female brass fittings.

Item#	Length	Ends of hose - hose diameter	Price
T124	12 ft (3.7 meters)	Female "B" fitting one side and cut end of hose other side - 1/4" diameter hose	$22.00
T254	25 ft (7.7 meters)	Female "B" fitting on both ends - 1/4" diameter hose	$34.00

The below larger diameter hose is only used if when you need a large hose to fit over the large inlet fittings on some torches. (You can get the smaller 1/4" hose listed above on these large inlet fittings with a bit of effort. A trick is to immerse the end of the hose in very hot water to soften the end.)

Order #	Length	Ends of hose - hose diameter	Price
T128	12 ft (3.7 meters)	Female "B" fitting one side and cut end of hose other side - 3/8" diameter hose	$29.50
T258	25 ft (7.7 meters)	Female "B" fitting on both ends - 3/8" diameter hose	$52.00

The fastest way to order any of these items is to call us toll free at 1-888-4HOTGLASS

Y - Connectors for Hose

Y Connector - Connect this fitting at the output of the regulator and attach two hoses so you can use two torches from the same tank. Oxygen and propane Y are packaged and priced separately.

Y Connector with valves - Same as the Y connector described above except has two on/off valves, one for each hose.

Item#	Description	Output end is a	Input end is a	Price
101	Y hose connector (oxygen)	hose (B fitting)	Oxygen regulator	$19.50
102	Y hose connector (propane)	hose (B fitting)	Propane regulator	$19.50
101V	Y hose connector with valve (Oxygen)	hose (B fitting)	Oxygen regulator	$32.50
102V	Y hose connector with valve (Propane)	hose (B fitting)	Propane regulator	$32.50

* The FA30 connects between the regulator and the gas hose and is more commonly used.

Flashback Arrestors

In some rare situations, a flame can travel back down a hose to the gas tank and cause an explosion.

This device helps prevent this reverse gas flow and flashback by using a reverse flow check valve and a flame arrestor.

Packaged and priced with both an oxygen and a propane arrestor.

Item#	Description	Output end is a	Input end is a	Price
FA10	Flashback arrestors (pair of oxygen and fuel gas) Connects directly to the fittings on a torch like the 3AB, 8M and Carlisle. We also include the fitting so you can put this arrestor in the middle of your twin hose. A good place to put this arrestor is a couple feet away from the torch. If you cut the hose you will not have fittings on the ends. Then must order one or two pair of A2 fittings for $5.00 to connect to arrestor.	Female B size hose fitting Male B size fitting using the included adaptor	Male B size hose fitting	$54.00
FA30	Flashback arrestors (pair of oxygen and fuel gas) Connects directly on the regulator.	Male B size gas hose fitting	Female B size gas hose fitting	$54.00
A2	Insert into cut end of hose and secure with hose clamp. Check for leaks.	One side Female B size hose fitting	Other side a barb that fits in a 1/4" ID gas hose - use a hose clamp	$5.00
A30 ox A31 fuel	Oxygen and Fuel Gas Fittings - The pieces in the picture labeled "included". A pair of these are included in the FA10. If you need extra pieces order the A30 and A31 parts.	Male B size gas hose fitting	Male B size gas hose fitting	$1.50 each

Note: Flashback arrestors have an arrow stamped on it to indicate the gas flow direction. Works in only one direction.

A2 optional, not included.

* The FA30 connects between the regulator and the gas hose and is more commonly used. Requires B size fittings on hose.

ALL IN ONE - 4 in 1

Combination Flashback Arrestor and Quick-Connect - Item# QDF30 - $79.00

Four Functions in a single item. Shorter and less expensive than if purchased separately.

A flashback arrestor
A quick connect and disconnect
An automatic shutoff valve
An internal reverse flow check valve all

Hose Quick Connects

Makes an easy job out of disconnecting and reconnecting your torch.

Disconnect your torch switching to a different torch or to put it away for safe keeping.

Great for quick classroom set up and take down.

Item#	Description	Input end is a	Output end is a	Price
QDB10	Quick Connects (pair)	Male B gas hose fitting	Female B fitting	$49
QDB20	Quick Connects (pair)	Hose to Hose	Hose to Hose	$49
QDB30	Quick Connects (pair)	Regulator	Male B hose fitting	$49

Manifold Gas System

Connect up to six torches to the same gas supply with this manifold system. Included are enough fittings and plugs to make 2 to 6 hose connections. Two manifolds are required, one for oxygen and one for propane. All Brass.

Custom Manifold Systems:
We can help you figure out which parts you would need for your system and pre assemble for no extra charge. Systems might also include quick connects and flashback arrestors. Place an order

Item#	Description	Price
M6	Manifolds system, Includes 1 block, 7 fittings and 4 plugs - two required - specify Oxygen or Propane	$57.50

Item#	Description	Price
MB7	Manifold block only, works with oxygen or gas	$39.00
32	Extra Fitting - one side fits in the manifold block, other side fits a standard right handed thread oxygen "B" size hose fitting.	$1.50
33	Extra Fitting - one side fits in the manifold block, other side fits a standard left handed thread gas "B" size hose fitting. Gas fittings have a "line notch" stamped into the nut part of the fitting to identify it as left handed threading.	$1.50
P41P	Extra Plug - plugs unused outlets in the manifold block	$2.00

Manifold setup for 3 torches.

Bulk Adaptor Systems

For users of Hot Head Torches or any torches similar to the HotHead torch

Save on the cost of propane by using a large bulk refillable propane tank instead of the small disposable fuel gas cylinders.

Item# F273701 uses a single hose with the correct fittings on each end. 5 or 12 foot hose.

Y-Propane F271735 - Connect two torches with this fitting. This Y fits into a bulk tank - the two other ends fit two F273701 hoses which go to the Hot Head torches.