Kit# 21 - The international kit for lamp workers and glass bead makers
Item# Kit21 - Priced Separately: $245.00 - Price: $199.00
The following items are included in the kit# 21:
- Hot Head Torch - Details
- Enhanced Didymium Safety Glasses
- Mandrel Release
- Mandrels - 1 dozen medium sized diameter
- Hand held graphite marvering paddle
- Graphite marvering pad for table top
- Torch Bracket attached to the worksurface
- Work Surface - Stainless 20 x 27cm
- Sparklighter
- An 8" glass rod support on worksurface
- Set of FOUR (not 6) different stainless steel rakes and shaping tools
- Set of 3 tweezers
- Tungsten probe and pin vice
- Two adaptors (not needed and not included if sent and used in the US)
- Selection of Moretti/Effetri COE104 glass - 1/2 Lb .23 Kilos - we select colors
$15.00 shipping to most countries *
* When kit# 21 is purchased by it self. Shipping will be adjusted if additional items are bought.
Actual products may differ then those pictured.
Free with purchase of this kit
- Mandrels - 1 dozen .062 small diameter
- Selection of Moretti Millefiori Glass Chips
- Sample of luster powders
- Sample of enamel powder
What do I need? (Adaptors not needed and not included if sent and used in the US)
-
Depending on your country, the HotHead torch may fit directly on to a propane tank. If not, you will need to use the adaptors included in your kit and connect your torch to a hose coming from your propane or propoline gas tank.
This setup will work regardless of what country you're in. Simply slide on the gas hose and secure with a hose clamp. -
You would need to get your own C-Clamps to clamp the work surface to your table. C-Clamps are too heavy to ship with your kit.
-
You need some instruction. Click Here to see our glass bead making books and videos.
There are no instructions with the kits. Learn how to by:
How to Make Glass Beads - A how to Book
by Cindy Jenkins - full color, the best inexpensive book available for the beginning glass beadmaker - #71283 only $14.95
Bulk Adaptor Systems
For users of Hot Head Torches or any torches similar to the HotHead torch. Save on the cost of propane by using a large bulk refillable propane tank instead of the small disposable fuel gas cylinders.Order No. F273701, uses a single hose with the correct fittings on each end. 5 or 12 foot hose.
Y-Propane F271735 
Connect two torches with this fitting. This Y fits into a bulk tank - the two other ends fit two F273701 hoses which go to the Hot Head torches.
|
Order # |
Description | Price |
| F273701 | Bulk adaptor system with 5 foot hose | $27 |
| F273702 | Bulk adaptor system with 12 foot hose | $42 |
| F271735 | Y - Propane Fitting | $32 |
Purchasing any of the three items above would increase the shipping weight and cost .
|
|
How to Make Glass Beads - A a how to book by Cindy Jenkins - full color, low cost first beginners book for the glass beadmaker - only $14.95 OR check out the incredible Passing the Flame Book for $75 Click Here to see the books! |
|
|
Add some glass to your kit |
Order Now
Catalogs