Table Top Kilns
for
Glass Fusing and Lampworking
Made by Sundance, all kilns 120 volts, 14 amps,
uses common available household electricity, electricity cost
to run these kilns for one hour at half power is aproximently
9 cents per hour, dial heat control switch (ICS) is included
with each kiln, pyrometer to measure temperature is not necessary
for glass fusing and can be purchased separately. Kilns are made
with insulating fire brick and stainless steel. It is 4-1/2"
deep inside. An extension ring can be added to increase the height
by 2-1/4" or 4-1/2"s. These kilns can also be used
for ceramics, copper enameling, art clay silver, or many different
uses. These kilns have the unique feature of being modular and
stacking. This allows you to add accessories to turn the kiln
into a kiln for beadmaking, a crucible kiln, a casting kiln or
kilns for other uses! Easily melts soda-lime soft glass but not
hard borosilica glass. All kilns should be kept 12" from
any flammable materials.
HG9
Glass Fusing Kiln
Specifications
Overall Height |
Outside Dimension |
Inside Height |
Dimension of kiln floor |
Largest kiln shelf |
Volts/Amps |
14" |
14½" x 17½" |
4½" |
9" x 9" |
8" x 8" |
120 / 14 |

The HG9 Kiln
|
Price |
HG9T |
Top - Fits HG9F heating ring - 13½" Square - with
single grip wooden handle |
$55 |
HG9F |
Heating ring - 9" x 9" inside - 120 volts, 14 amps
- with control switch |
$195 |
HG9B |
Bottom -13½" x 13½" outside - 4½"
tall, fits underneath HG9F or HG9BE |
$45 |
|
Price if pieces sold seperately |
$295 |
HG9 |
Complete Fusing Kiln - 9" X 9"
inside fusing area - includes the above 3 parts - HG9T, HG9F,
HG9B |
$275 |
Optional items for the HG9 Fusing
Kiln |
HGF4 |
Feet - Four 2" x 2" x 2" insulated
fire brick blocks |
$6 |
KF9 |
Accessory Kit includes 8" kiln shelf,
3 kiln posts, kiln wash and brush |
$22 |
HG9240 |
This kiln with 240 Volts (7 amps) - add $20
to the price for $259 |
$20 |
HG10BE |
Extension ring collar with side door opening
for beadmaking click
here to see |
$115 |
HG9E2 |
Extension ring collar increases height of
kiln by 2-1/4" |
$36 |
HG9E4 |
Extension ring collar increases height of
kiln by 4-1/2" |
$60 |
If
you want to ANNEAL your glass, you mut be able to read the temperature
of the kiln! You must select from one of the 3 temperature
reading devices below.
|
|
|
PA1 |
Pyrometer - large face gauge - details |
$69 |
2242 |
Pyrometer - digital - details
....................Regular price $89 |
$79 Out Of Stock |
5555 |
Controller - 3 Key Pad - Fully automatic and
digital, (Pyrometer is not needed - it is built into this digital
controller - details
Temp Out of Stock |
$300 |
DTC1000 |
Controller - 12 Key Pad - Fully automatic
and digital, by Paragon - (Pyrometer is not needed - it is built
into this digital controller) details |
$395 |
 |
Innovative Adornments
- An introduction to Fused Glass
Jewelry and Wire Jewelry
- This book describes how to set
up and use this kiln.
- Order No. 85351
- $19
- Click
here for details
|