Kilns for Glass Lampwokring - Sundance Art Glass
Sundance Art Glass
All Torches Glassblowing Pyrex Pipemaking Lampworking Beadmaking Soft Glass & Hard Glass Nortel Carlisle National GTT Gas Equipment Oxygen Concentrators Torch Tips
Moretti/Effetre Soft Glass Borosilicate Hard Glass/Pyrex Bullseye Glass Dichroic Rods/Tubing Fusing Glass COE 33 COE 90 COE104
Moretti/Effetre Soft Glass Borosilicate/Pyrex Hard Glass Bullseye Dichroic Glassblowing Sculpture Boro
Fusing Tool Kits Gas Equipment Kits
Glassblowing Pyrex Pipemaking Lampworking Beadmaking Soft Glass Hard Glass Fusing Our Newsletter!
Lampworking Glassblowing Fusing Glass Bead casting
Lampworking Borosilicate Pyrex Glass Bead Soft Glass
Fusing Lampworking Beadmaking Glassblowing
For Fusing For Stained Glass
COE 90 Effetre COE 104 Borosilicate COE 33
Fusing Bead Lampworking Glassblowing Crucible Kiln Kiln Controllers Kiln Pyrometers Kiln Shelves and Posts
Lampworking Soft Glass Beadmaking GlassBlowing Hard Glass Pyrex Pipemaking

Glass Table Top Kilns
This page is for reference ONLY

Pricing may not be accurate, and not all listed kilns my be available

Kilns for Instructors, schools and multiple users
Lampworking Kilns

What is the basic difference between all of these kilns? Mostly size and price. The smaller the kiln, the less the price. There are also two different styles of kilns, Quartz and Modular Stacking. Click Here to see the differences.

15 different kilns for flameworking, glassblowing, pipemaking, lampworking and glass beadmaking.

What is the basic difference between all of these kilns? Mostly size and optional side door opening. The smaller the kiln, the less the price. There are also three different styles of kilns: Quartz, Modular Stacking and Front Door Loading. Click Here to see the differences. All are 115 volts at 14 amps.

Kilns - Front Door Loading
Model Image Details Inside Floor Size Price
Gas heated! no electricity
HG6G Hot Glass Gas Powered Kiln Click here for details 6½" x 6½"
9" x 9"
HG8B9D lampworking-kiln Click here for details 9" x 9" $665
Click Here for Details

2 Styles!
9" x 20" $588
5621 Paragon SC-2 5621 Kiln Click here for details

4 Styles to Choose From
8" x 8" $548
F11  F11 and F18 With Built in Digital Temperature Controller: Glass Beadmaking, Lampworking, Flameworking Kiln Click Here for Details 11" x 11" $1008
F13 F13 F130 by Paragon Click Here for Details 11"x11" $1080

Click Below for Different Kilns
Beadmaking Kilns Crucible Kilns Fusing Kilns
Lampwork/Sculpture/420 Kilns Glassblowing Kilns PMC Art Clay Silver Kilns

Kiln Making Materials
Brick, fiber, Elements, etc.
Click Here

Controllers and Pyrometers

Controllers Kiln Temperature Controllers
Pyrometers Kiln Temperature Pyrometers

Kilns for instructors, schools, and multiple users

Kilns for instructors, schools, and groups.

We have two great stock kilns for multiple users.

Our HG9B9x2 kiln has two side door openings on opposite sides. Students can work on opposite sides of a table. Of course we can have any custom kiln built to your specifications. We have had HotGlass build kilns for us that can accommodate 8 students, either in a octagon shape or 4 down each side of the kiln.

The fastest way to order a kiln is to call us at 1(800)-641-6262!

Do you need a kiln for lampworking?

There are two reasons you would need a kiln designed for Lampworkers:

When you are done working the bead in a torch, you need to cool your bead slow enough so it will not thermal shock and crack. A kiln will easily do this. It is important to note that you may still have stress in the bead even if you have cooled the bead successfully without cracking. The glass bead must also be properly annealed. Annealing the glass bead is accomplished by holding the bead at a particular temperature for a particular period of time. A kiln will do this.

The temperature depends on the type of glass you are using (Moretti is about 940 degrees F) and the length of time depends on the thickest part of the glass piece (a typical time might be 15 minutes. Longer won't hurt). In other words the thicker the piece, the longer the annealing time. Glass can be cooled, then at any time later, put back into a cold kiln and brought up to temperature for annealing, or the annealing can be done immediately by putting the bead, still on the mandrel, directly into a hot kiln right from the torch flame. A HotGlass kiln is specially designed so a bead can be safely put directly into a hot kiln.

There are four popular methods of cooling glass beads.

Cooling the bead by slowly removing it from the torch flame. This is called flame annealing. Many artistes use this method of flame annealing even if they are using a kiln. This may keep smaller sized beads from thermal shocking This method can do some annealing for any sized bead if done properly.

Placing your beads between two layers of fiber blanket. This method may keep smaller beads from thermal shocking. This method does nothing to anneal your glass bead..

Bury your bead deep in a hot crock pot filled with hot vermiculite. This method may keep smaller beads from thermal shocking. This method does nothing to anneal your glass bead.

Place your bead in a heated kiln. Using a kiln will keep any sized bead from thermal shocking. Using a kiln will anneal your glass bead if kept at the correct temperature for a sufficient period of time.

How is a Lampworking Kiln different from a Ceramic Kiln?

A ceramic kiln would work as a bead kiln. But a Bead Kiln has many desirable and safe features. Remember, beads are put into a kiln while it is on and hot!

if you put a bead, still on the mandrel, into a ceramic kiln and you accidentally touched one of the exposed element wires, you will become electrocuted! Our HotGlass kilns protect you so you will not become shocked!


yes! when a kiln is used for glass beadmaking, it is kept at about 1000 degrees F. When you open a ceramic kiln at 1000 degrees to put in a bead, you will be hit with a lot of heat. Our HotGlass kilns have a special opening on the side, which allows you to easily and safely insert your beads comfortably. Simply lift up the loose cloth door and place the mandrel into the bead rack.

Shipping Disclaimer

We require that the shipping costs for all orders including kilns be calculated by
our customer service representatives; the shipping that you are quoted in check
out may not necessarily reflect the actual shipping cost of the kiln, as kilns must
be shipped separately. You will be contacted by one of our customer service
representatives once your order has been processed and your shipping costs
have been figured accurately.

Register Account | Login
View Account | Logout
Shopping Cart
Secure Shopping
Secure Checkout
New Stuff And Sales!
Clearance Items!

Home | About Us | Store Locator | Wholesale Qualifications
Order | Employment Opportunities
Contact Us | Sitemap

Copyright & ™ 2008 Sundance Art Glass. All rights reserved.
Sundance Art Glass, 6052 Foster Rd., Paradise, CA, 95969-3121, USA
Phone: 800-641-6262  |