Annealing Kilns Flameworking Kilns Glass Beadmaking Kilns Lampworking Kilns Fusing Kilns - Sundance Art Glass Center
Sundance Art Glass
All Torches Glassblowing Pyrex Pipemaking Lampworking Beadmaking Soft Glass & Hard Glass Nortel Carlisle National GTT Gas Equipment Oxygen Concentrators Torch Tips
Moretti/Effetre Soft Glass Borosilicate Hard Glass/Pyrex Bullseye Glass Dichroic Rods/Tubing Fusing Glass COE 33 COE 90 COE104
Moretti/Effetre Soft Glass Borosilicate/Pyrex Hard Glass Bullseye Dichroic Glassblowing Sculpture Boro
Fusing Tool Kits Gas Equipment Kits
Glassblowing Pyrex Pipemaking Lampworking Beadmaking Soft Glass Hard Glass Fusing Our Newsletter!
Lampworking Glassblowing Fusing Glass Bead casting
Lampworking Borosilicate Pyrex Glass Bead Soft Glass
Fusing Lampworking Beadmaking Glassblowing
For Fusing For Stained Glass
COE 90 Effetre COE 104 Borosilicate COE 33
Fusing Bead Lampworking Glassblowing Crucible Kiln Kiln Controllers Kiln Pyrometers Kiln Shelves and Posts
Lampworking Soft Glass Beadmaking GlassBlowing Hard Glass Pyrex Pipemaking

Two user Table Top Kiln


Glass Beadmakers, Glassblowers, Fusers

Model No. HG9B9x2

This kiln uses common available household electricity, 115 volts at 14 amps. The cost to run this kiln for one hour at half power is approximately 9 cents. A dial heat control switch (ICS) is included with each kiln. A pyrometer, purchased separately, is necessary to measure temperature. The bead kiln, made with insulated fire brick, can also be used for fusing glass, ceramics, and copper enameling. The UNIQUE feature of being modular and stacking allows you to add or remove accessories to turn the kiln into a kiln for other uses! All kilns should be kept 12" from any flammable materials. Shown in the picture, is the optional snap on rod rest and the fiber cloth door covering, which is included free with the kiln.



for the HG9B9x2 Kiln
 Overall Height Outside Dimension Inside Height Size of kiln floor for beads  Size of kiln floor for fusing Largest kiln shelf Volts/Amps
 19" 14½" x 20" 4½" 9"x9" twice!  9" x 9"  8" x 8" 120 / 14


Features of this kiln

  • This kiln has an opening on opposite sides. Therefore two glass workers or students can sit on opposite sides of the work bench without getting in each others way.
  • This kiln out performs every other kiln on the market for the amount of beads it can hold! See at the bottom of this page for details.

Why have a side door opening for a glass bead kiln?

  • Comfort. Sure, one could put a mandrel into any kiln. But when you lift the lid, a blast of 1000 degree heat will hit you. The unique feature (invented by HotGlass) of this bead kiln is a side door opening. This allows you to insert beads through the side without much heat discomfort.
  • Safety. Sure you could place a mandrel into any kiln. But if you happen to touch one of the exposed elements with the metal mandrel you will get an electric shock. The unique feature (invented by Hot Glass) of this kiln is a side door opening. This keeps the metal mandrel away from any electrical elements for safety.

Advantages of this kiln as compared to having 2 separate kilns.

  • Only one pyrometer or digital controller is needed, to reduce cost.
  • Only one electric circuit is needed for artists with limited available power.
  • The cost of this kiln is much less than buying two separate kilns.

 HG9B9x2 Kiln with Temperature Dial Control Only  Kiln With 12 Key Digital Temperature Controller
and Dial Control

 Dial control option for hot glass kiln.

Don't forget you may also need a pyrometer (Temperature Gauge)

12 key digital temperature controller with dial control for hot glass kiln.
$434 $829

The HG9B9x2
2 User Kiln by HotGlass

HG9T Top - with single grip wooden handle $45
HG9F Heating ring - 9" x 9" inside - 120 volts, 14 amps - with control switch $195
HG9x2BE Bead Extension - two 9" x 9"spaces - with two 9" wide by 2¼"high side door openings $144
HG9x2B Bottom -13½" x 18" outside dimension - fits underneath HG9x2BE $50
HG9B9x2 Complete Kiln - 9" X 9" twice inside bead area - includes the above 4 parts - HG9T, HG9F, HG9x2BE, HG9x2B $434
  Optional items for the HG9B9x2 Kiln
HGF4 Feet - Four 2" x 2" x 2" insulated fire brick blocks $6
RR4 Snap on Glass Rod Rest - stainless steel - 4½" wide $19
BR9 Two separate slide in Bead Mandrel Rests - two required details $14 ea
  Two Fiber Cloth Door Coverings, one on each opening Included
HFD9 Optional Hinged Fiber Door Cover - two would be needed - remember the CLOTH doors are included free $2 ea

Prices are constantly changing, this page may not reflect actual pricing. Please call for current prices.

For glass annealing it's important to know the temperature of your kiln. If you want to ANNEAL your glass, you mut be able to read the temperature of the kiln! You must select from one of the 3 temperature reading devices below.
PA1 Pyrometer - large face gauge - details $69
7772 Pyrometer - digital -....Regular price $89....On SALE $69
DTC1000 Controller - 12 Key Pad - Fully automatic and digital, by Paragon - (Pyrometer is not needed - it is built into this digital controller) details $395

Check out this feature!Slide in bead rack to hold more beads with optional snap on rod rest.

Slide in bead rack that holds many times more beads than any other kiln the same size!

Close up view of the side opening.

Even though the opening is only 9" wide by 2¼" high, many beads can be stacked upward. Notice from this picture how many beads are just on the left 2" of the kiln. Pictured on the right is the optional glass rod holder. Place glass rods on this rack to preheat the ends. When you are ready to use that color, simply remove the rod and go directly into the torch flame. This eliminates the need to preheat the tip of the glass rod in the torch! See the web material on the top of the picture. That is HotGlass's unique high temperature fiber cloth door. We pulled the cloth up to expose the inside of the kiln for this picture. This cloth door covers the door to keep much of the heat in the kiln. Because it is flexible, the cloth will bend around any mandrels or glass rods protruding from the kiln.


Why the HG kilns are better!

  • This kiln is made by HotGlass. They invented the front door brick kiln! We have evaluated the few worthy bead kilns now made and we found HotGlass to be the best quality, more features and at the best price! There is no choice or question what kiln is the best!
  • These HotGlass kilns can also be used for fusing, annealing glass, enameling or ceramics. Most other bead kilns do not.
  • These HotGlass kilns are priced lower than any other bead kiln on the market. Prices start under $250 for a kiln with pyrometer for reading temperature and a dial control switch for adjusting the temperature!
  • The HotGlass kilns are Fiber Free for those of you who do not like to have ceramic fiber in your studio. (Some of our HotGlass kilns come with a fiber cloth door, but this cloth is not necessary and can be easily removed.)
  • These HotGlass kilns have several unique features not found in other brand bead kilns.!
    • Fiber cloth door on some models. This feature is ingenious! This easy to open cloth door helps keep the heat in and wraps around any glass rods or mandrels sticking out of the kiln.
    • Optional Built in bead rack for glass beadmakers. And not just a regular bead rack. This allows one to stack across and upward so three or four times as many beads can be put in these kilns each beadmaking session! This makes our kilns three to four times larger than other kilns of the same size!
    • Wooden handles. Other brand kilns have metal handle lids or doors which are worthless when the kiln gets hot.

Register Account | Login
View Account | Logout
Shopping Cart
Secure Shopping
Secure Checkout
New Stuff And Sales!
Clearance Items!

Home | About Us | Store Locator | Wholesale Qualifications
Order | Employment Opportunities
Contact Us | Sitemap

Copyright & ™ 2008 Sundance Art Glass. All rights reserved.
Sundance Art Glass, 6052 Foster Rd., Paradise, CA, 95969-3121, USA
Phone: 800-641-6262  |