Kiln Xpress Quick Guide - Sundance Art Glass Center
Sundance Art Glass


Need Your Order
in a Hurry?
For a fee of $10 your order goes ahead of regular orders. If your order is received before 10AM PST, 1PM EST we'll make every effort to see that it goes out the same day
click here to purchase

Sundance Glass
Over 40 years!

Unbeatable Pricing
Unbeatable Quality
Unbeatable Service
Unbeatable Selection


Click Here For Details


Print version of this page

Paragon Sentry Xpress Quick Start Guide
Please read the instruction manual for more detailed information. For a copy, click here.

Press START/STOP at any time to stop a firing. To return to IdLE after the firing is completed, press START. Single-Speed Instructions Fires to a temperature, holds temperature if needed, then shuts off.
  1. From IdLE, press START.

  2. To select a firing speed, press the Up Arrow key repeatedly
    until the desired firing speed appears.
    SPd1 = 200°F or 111°C rate per hour
    SPd2 = 500°F or 277°C rate per hour
    SPd3 = 1000°F or 555°C rate per hour
    SPd4 = 1500°F or 833°C rate per hour
    SPd5 = Full Power
    Then press START.

  3. Use the arrow keys to enter the temperature you are firing to.
    Press START.

  4. Use arrow keys to enter the hold time (hours.minutes). (If not
    needed, enter 00.00.) Press START. Strt will appear.

  5. Press START again. -On- will appear. The kiln is firing.

Ramp-Hold Instructions
Fires up to 8 speeds and temperatures (segments). Controls
heating and cooling.

  1. From IdLE, press START.

  2. Press the Up Arrow key. Select PrO1, PrO2, PrO3, or PrO4.
    Press START.

  3. rA 1 will appear. Use the arrow keys to enter firing rate
    (temperature change per hour) for segment 1. (1° = slowest
    rate. 1799°F/999°C = full power.) Press START.

  4. °F 1 or °C 1 will appear. Use the arrow keys to enter the
    temperature you are firing to. Press START.

  5. HLd 1 will appear. Use the arrow keys to enter the hold time
    (hours.minutes). (If not needed, enter 00.00.) Press START.

  6. Continue entering values for the segments needed. When rA
    appears for the next segment that you don’t need, select 0000.
    (This will zero out any remaining unused segments.) Then
    press START. Strt will appear.

  7. Press START again. -On- will appear. The kiln is firing.

A video on programming Ramp-Hold on the 3 Key Controller A video on advanced programming techniques on the 3 Key Controller

Shopping Cart
Secure Shopping
Secure Checkout
Search

Specials!
New Stuff And Sales!
Clearance Items!
  • Used items
  • Prototypes
  • Discontinued Items
  • Surplus Items
  • Cosmetic Issues
  • Dirty Packaging
  • Overstocked items
  • Always functional
  • Always a great deal
  • Click here to visit
    Clearanceit.com



Copyright & ™ 2008 Sundance Art Glass. All rights reserved.
Sundance Art Glass, 6052 Foster Rd., Paradise, CA, 95969-3121, USA
Phone: 800-946-8452  |  Phone: 530-872-3021