"Thin Fire" Fiber Shelf Paper
There are two popular ways to protect your kiln shelf when fusing: Kiln Wash and this ThinFire Paper. Use this ThinFire (or actually any of the fiber paper listed below) between the kiln shelf and your glass so the glass will not stick to the shelf. This saves you from coating the kiln shelf with kiln wash. ThinFire also creates the smoothest backing possible. ThinFire Kiln Shelf Paper is a ceramic-based paper specially formulated for glass fusing. The ThinFire is not reusable. Click here to learn more about ThinFire
Order
Number |
Thin Fire Shelf Paper: Sheets | Minimum order | Price |
TF20 | Thin Fire Paper - 21" x 21" sheet | 4 sheets |
$14 ![]() |
TF20100 | Thin Fire Paper - 100 sheet pack | 1 pack |
$200 Quantity:
|
Order Number |
Thin Fire Shelf Paper: 10ft Rolls |
Minimum order | Price |
![]() |
TF1007 -
Thin Fire
7" wide x 10ft long roll. |
1 Roll |
$10 Quantity:
|
![]() |
TF1008 -
Thin Fire
8" wide x 10ft long roll. |
1 Roll |
$11 Quantity:
|
![]() |
TF1009 -
Thin Fire
9" wide x 10ft long roll. |
1 Roll |
$12 Quantity:
|
![]() |
TF1012 -
Thin Fire
12" wide x 10ft long roll. |
1 Roll |
$16 Quantity:
|
![]() |
TF1013 -
Thin Fire
13" wide x 10ft long roll. |
1 Roll |
$17.00 Quantity:
|
![]() |
TF1016 -
Thin Fire
16" wide x 10ft long roll |
1 Roll |
$22.00 Quantity:
|
![]() |
TF1020 -
Thin Fire
20" wide x 10ft long roll |
1 Roll |
$24.00 Quantity:
|

Fiber Paper
These papers become stiff with an organic ridigizer. During the first firing, you will see it turn black and then white again as the binder burns off. There will be some smoke and smell. The paper will be less rigid if you choose to reuse the paper. Fiber paper can be used to make holes in glass by cutting strips and placing between layers. After firing the glass, expose the hole by poking out the paper. Also used to make design indentations on the back of fused pieces by placing design strips under the glass before fusing.
* This does not mean you get that quantity for that price. The minimum order amount means we will not ship it to you unless you order the listed quantity (or more).
*Density - how many pounds per cubic foot (Kgs per square meter) the denser the blanket, the
more the insulating value but less flexible than a less dense blanket (less dense may be better for
you if make molds) It is interesting to note that most of insulating value of fiber products is in the
NUMBER of fibers. This is why we list the density of the fiber products. If you took a piece of fiber
and squashed it thinner, it would have close to the same insulating value.
Rigidizer
Fiber Mold Hardener. Soak fiber paper or fiber blanket with this rigidizer and dry.
Fiber will harden.
This item can not be sent out of the USA.
Order Number | Quantity | Price |
FRIG16 | 16 Ounces |
$9 ![]() |
Order # | Description | Price | |
FB812 | Fiber blanket - 2 pieces | 8" x 12" |
$8 ![]() |
FB1218 | Fiber blanket - 2 pieces | 12" x 18" |
$16 ![]() |