<
Flameworkers Kit - Sundance Art Glass
Sundance Art Glass
All Torches Glassblowing Pyrex Pipemaking Lampworking Beadmaking Soft Glass & Hard Glass Nortel Carlisle National GTT Gas Equipment Oxygen Concentrators Torch Tips
Moretti/Effetre Soft Glass Borosilicate Hard Glass/Pyrex Bullseye Glass Dichroic Rods/Tubing Fusing Glass COE 33 COE 90 COE104
Moretti/Effetre Soft Glass Borosilicate/Pyrex Hard Glass Bullseye Dichroic Glassblowing Sculpture Boro
Fusing Bead Borosilicate Pyrex Pipemaking Glassblowing
Glassblowing Pyrex Pipemaking Lampworking Beadmaking Soft Glass Hard Glass Fusing Our Newsletter!
Lampworking Glassblowing Fusing Glass Bead casting
Lampworking Borosilicate Pyrex Glass Bead Soft Glass
Fusing Lampworking Beadmaking Glassblowing
For Fusing For Stained Glass
COE 90 Effetre COE 104 Borosilicate COE 33
Fusing Bead Lampworking Glassblowing Crucible Kiln Kiln Controllers Kiln Pyrometers Kiln Shelves and Posts
Lampworking Soft Glass Beadmaking GlassBlowing Hard Glass Pyrex Pipemaking


Need Your Order
in a Hurry?
For a fee of $10 your order goes ahead of regular orders. If your order is received before 10AM PST, 1PM EST we'll make every effort to see that it goes out the same day
click here to purchase

Sundance Glass
Over 40 years!

Unbeatable Pricing
Unbeatable Quality
Unbeatable Service
Unbeatable Selection


Click Here For Details




Kit #420X
Professional Flameworkers Kit


for making glass beads, marbles, vessels & sculptures



kit 420

Kit comes with the Major Burner with Premix Top



kit #4 with a major burner torch and a pre mix on top

All for $999

click here to purchase

Or select a different torch from the list at the bottom of the page.


Kit #420Xtreme
This kit uses the two gas (oxygen and propane) Torch. (choose a  torch - see below) Just connect this torch to a BBQ type propane tank (you may have one in your back yard) and to an oxygen tank. Most people rent this oxygen tank at their local welding supply store. It might typically cost $5 per month to rent the tank and about $15 to $35 each time you have it refilled. Click here to find out more about gas tanks. It costs about $1 to $2 per hour to run the Major Burner torch.

regulator thumbIf your planning to use an Oxygen Concentrator with your kit put a note in your order or give us a call. We will remove the oxygen regulator from the kit. We will then deduct $60 from your order if paying by credit card or refund your PayPal account $60.


Use this kit when you want to be assured that you have the most complete set of tools for the professional lamp worker. This equipment can also be used to make buttons, marbles, vessels and sculptures.

(What you get is what is on the list below - the pictures may not be updated)

Kit #420X Includes:
The discounted pricing listed below for this kit applies only when the complete kit is purchased - no substitutions please except where noted - torch and safety glasses.


You can substitute the torch in this kit. Substitute any torch we sell. We will adjust the price accordingly.
Some sample torches are listed below.
kit #4 with the Minor Torch by Nortel for lampworkers Glass Beadmakers and Glassblowers This kit with the
Minor Burner Torch

Item #420XMinor

Regular Price - $849

Our Kit Price - $780
You save $69

click here to purchase

kit #4 with the Mega Minor Torch by Nortel for lampworkers Glass Beadmakers and Glassblowers This kit with the
Mega Minor Torch

Item #420XMega

Regular Price - $879

Our Kit Price - $810
You save $69

click here to purchase
kit #4 with the Minor Torch by Nortel for lampworkers Glass Beadmakers and Glassblowers This kit with the
Alpha Torch

item #420XAlpha

Regular Price-$867

Our Kit Price -$798
You save $69

click here to purchase

  Bravo Bethlehem Torch for making glass sculptures This kit with the
Bravo Torch

item #420XBravo

Regular Price-$1655

Our Kit Price-$1586
You save $69
click here to purchase

Midrange Torch for making glass sculptures. This kit with the
Midrange Torch

Item #420XMid

Regular Price - $956

Our Kit Price - $887
you save $69

click here to purchase
midrange glass torch for lampworkers glass beadmakers and glassblowers This kit with the Midrange Surface Mix Torch with Minor Bench Burner mounted on top

Item #420XMidMin

Regular Price - $1066

Our Kit Price - $997
you save $69

click here to purchase

midrange glass torch for lampworkers glass beadmakers and glassblowers This kit with the Midrange with Mega Minor Bench Burner
mounted on top

Item #420XMidMega

Regular Price - $1112

Our Kit Price - $1043
you save $69

click here to purchase

midrange glass torch for lampworkers glass beadmakers and glassblowers This kit with the Midrange
Pre Mix Torch

Item #420XMidPre

Regular Price - $1066

Our Kit Price - $997
you save $69

click here to purchase
major glass torch for lampworkers glass beadmakers and glassblowers This kit with the Major Bench Burner Surface Mix Torch with Minor Bench Burner mounted on top

Item #420XMajMin

Regular Price - $1086

Our Kit Price - $1017
with 3/8" hose -
you save $69

click here to purchase

kit #4 with a major burner torch and a mega minor on top This kit with the Major Bench Burner Surface Mix Torch with Mega Minor Bench Burner mounted on top

Item #420XMajMeg

Regular Price - $1136

Our Kit Price - $1067
with 3/8" hose - you save $69
click here to purchase
kit #4 with a major burner torch and a pre mix on top This kit with the Major Bench Burner Premix Torch

Item #420XMajPre

Regular Price - $1086

Our Kit Price - $1017 
with 3/8" hose you save $69

click here to purchase

Red Max torch for lampworkers glass beadmakers and glassblowers This kit with the Red Max Surface Mix Torch
with Minor Bench Burner mounted on top

Item #420XMaxMin

Regular Price - $1186

Our Kit Price - $1117
with 3/8" hose you save $69

click here to purchase
 
Red Max torch for lampworkers glass beadmakers and glassblowers This kit with the Red Max Surface Mix Torch with Mega Minor Torch mounted on top

Item #420XMaxMeg

Regular Price - $1236

Our Kit Price - $1167
with 3/8" hose
 you save $69

click here to purchase
  Red Max torch for lampworkers glass beadmakers and glassblowers This kit with the Red Max Premix Torch

Item #420XMaxPre

Regular Price - $1186

Our Kit Price - $1117
with 3/8" hose
you save $69



click here to purchase
kit #4 with the 8m torch and the sm7 tip This kit with the National 8M7 Torch w/ SM7 Tip

Item #420X8M7

Regular Price $910

Our Kit Price - $841
You Save $69

click here to purchase
National 8M +HTC3 Tip when working with borosilicate/pyrex/hard glass in making glass sculptures. This kit with National 8M Torch w/ HTC1 +
1 Additional Tip

Item #420X8M2

Regular Price $939

Our Kit Price - $870
You Save $69

click here to purchase
kit #4 with the national 6b torch and htc1 tip This kit with the National
6B Torch and the popular HTC1 Tip

Item #420X6B


Regular Price - $828
Our Kit Price - $752
You Save $69

click here to purchase

   kit #4 with the Red Max Glass Torch by Nortel with the pre mix top torch This kit with the
Red Rocket Torch
With the Premix Sidefire

Item #420XRocPre

Regular Price - $1716

Our Kit Price - $1647
with 3/8" hose
 you save $69


click here to purchase
  You can also order this
Kit without a Torch!
These kits may also be edited once you place the Kit in shopping cart


Kit #420X14
with a 12ft 1/4" hose
Our Low Price
- $679.25


click here to purchase

Kit #420X38 with a 12ft 3/8" hose
Our Low Price -
 $686.75


click here to purchase
   


Add to your kit:
Contemporary Lampworking 2nd Edition- A how to book by Bandhu Scott Dunham - full color, the best book available for the glass flameworker. Click here to see all about this book!


Work Surfaces

For Torch Lampworking, Glassblowing and Glass Bead making


rod rest Troch Mount Dimensions are approximate ± 0.5"
Item # Size Description Price
Stainless Steel work surface for lampworking glass beadmaking and glassblowers #1617
12" x 13"

Stainless Steel Work Surface - 12" x 13" flat area, heavy .030" thick metal. One edge is bent so you can wrap it over the edge of your work bench. The far edge is also bent upright so you have a nice 9" long rest for your colored glass rods.

$16
work surface for lampworking glass beadmaking blassblowing #1636
17" x 18"

Stainless Steel Work Surface - 17" x 18" flat area, heavy thick metal. Actually a bit smaller so we can fit it in a standard box. Front edge is bent so it fits nicely over the edge of your work table. The far edge is also bent upright so you have a nice 18" long rest for your colored glass rods. May need to be shipped in it's own box.

$29
work surface for lampworking glass beadmaking blassblowing #1638
16" x 24"

Stainless Steel Work Surface - 16" x 24" flat area, heavy thick metal. Actually a bit smaller so we can fit it in a standard box. Front edge is bent so it fits nicely over the edge of your work table. The far edge is also bent upright so you have a nice 24" long rest for your colored glass rods. May need to be shipped in it's own box.

$38
worksurface for lampworking glass beadmaking and glassblowing #1644
13" x 18"

Stainless Steel Work Surface - 13" x 18" flat area, heavy thick metal. Actually a bit smaller so we can fit it in a standard box. Front edge is bent so it fits nicely over the edge of your work table. The far edge is also bent upright so you have a nice 18" long rest for your colored glass rods. May need to be shipped in it's own box.

$24
work surface 1659 #1659
16" x 30"

Stainless Steel work surface - actually 16" x 30" flat area, heavy thick metal. Front edge is bent so it fits nicely over the edge of your work table. The far edge is also bent upright so you have a nice 30" long rest for your colored glass rods. May need to shipped in it's own box.

$49
Accessories pictured not included
Morretti Northstar Boroscilicate Pyrex Effetre colored glass rods resting and holding place. Durable, portable, stainless steel, can also go inside your glass bead sculpture kiln Glass Rod Rests This movable rod rest is used to support glass rods to keep them up off the flame worker's workbench for easier grabbing, better organization, and to keep the glass rods cleaner. The rippled edge keeps the rods from rolling around. These durable stainless steel rod holders can also be placed inside a glass bead kiln to support your mandrels.

Item# Description Price
rod and tool rest #RRT8 - 8" Rod rest - fits inside 9" kilns or on your workbench
Volume Pricing
Buy 1 6.00
Buy 2 $5.40
Buy 4 $4.80
Buy 8 $4.20
$6.00

Qty:


tool and rod rest for lampworkers #RRT12 - 12" Rod rest - fits inside 13" kilns or on your workbench
Volume Pricing
Buy 1 $9.00
Buy 2 $8.10
Buy 4 $7.20
Buy 8 $6.30
$9.00
Qty:
tool and rod rest for lampworkers #RRT17 - 17" Rod rest - fits inside 18" kilns or on your workbench
Volume Pricing
Buy 1 $11.00
Buy 2 $9.90
Buy 4 $8.80
Buy 8 $7.70
$11.00
Qty:
tool and rod rest for lampworkers #RRT8T - 8" Rod Rest
Extra Tall
for easy Grabbing

Volume Pricing
Buy 1 $9.00
Buy 2 $8.10
Buy 4 $7.20
Buy 8 $6.30

$9.00
Qty:


tool and rod rest for lampworkers #RRT12T - 12" Rod Rest
Extra Tall
for easy Grabbing

Volume Pricing
Buy 1 $12.00
Buy 2 $10.80
Buy 4 $9.60
Buy 8 $8.40
$12.00

Qty:
rod and tool rest #RRT17T - 17" Rod Rest
Extra Tall
for easy Grabbing

Volume Pricing
Buy 1 $14.00
Buy 2 $12.60
Buy 4 $11.20
Buy 8 $9.80

$14.00
Qty:
glass-rod-rest-lampworking
Difference between standard and tall rod rests.






Looking for something? Torches? Tools? Kilns?
Look in our index. Click on: Sitemap



Tool Caddy
$28.00
Organize your bench top with this handy tool caddy Tool Caddy tool caddy




Register Account | Login
View Account | Logout
Shopping Cart
Secure Shopping
Secure Checkout
Search
Specials!
New Stuff And Sales!
Clearance Items!

Home | About Us | Store Locator | Wholesale Qualifications
Order | Employment Opportunities
Contact Us | Sitemap


Copyright & ™ 2008 Sundance Art Glass. All rights reserved.
Sundance Art Glass, 6052 Foster Rd., Paradise, CA, 95969-3121, USA
Phone: 800-946-8452  |