Lamp working kits flame working kits glass bead making kits - Sundance Art Glass
Sundance Art Glass
All Torches Glassblowing Pyrex Pipemaking Lampworking Beadmaking Soft Glass & Hard Glass Nortel Carlisle National GTT Gas Equipment Oxygen Concentrators
Moretti/Effetre Soft Glass Borosilicate Hard Glass/Pyrex Bullseye Glass Dichroic Rods/Tubing Fusing Glass COE 33 COE 90 COE104
Moretti/Effetre Soft Glass Borosilicate/Pyrex Hard Glass Bullseye Dichroic Glassblowing Sculpture Boro
Fusing Bead Borosilicate Pyrex Pipe Making Glassblowing
Glassblowing Pyrex Pipemaking Lampworking Beadmaking Soft Glass Hard Glass Fusing Our Newsletter!
Lampworking Glassblowing Fusing Glass Bead casting
Lampworking Borosilicate Pyrex Glass Bead Soft Glass
Fusing Lampworking Beadmaking Glassblowing
For Fusing For Stained Glass
COE 90 Effetre COE 104 Borosilicate COE 33
Fusing Bead Lampworking Glassblowing Crucible Kiln Kiln Controllers Kiln Pyrometers Kiln Shelves and Posts
Lampworking Soft Glass Beadmaking GlassBlowing Hard Glass Pyrex Pipemaking


Need Your Order
in a Hurry?
For a fee of $10 your order goes ahead of regular orders. If your order is received before 10AM PST, 1PM EST we'll make every effort to see that it goes out the same day
click here to purchase

Sundance Glass
Over 40 years!

Unbeatable Pricing
Unbeatable Quality
Unbeatable Service
Unbeatable Selection


Click Here For Details




Kit #5

For lamp workers and glass bead makers Item # Kit5 - Price: $434.50 click here to purchase
Kit# 5 for lamp workers and glass bead makers with Minor Burner Torch for making glass sculptures, beads, animals, figures, and more!
Actual products may differ from those pictured.
Free with purchase of this kit
  • Mandrels - 1 dozen .062 diameter
  • Selection of Moretti Millefiori Glass Chips
  • Sample of luster powders
  • Sample of enamel powder

This kit uses the two gas (oxygen and propane) Minor Bench Burner by Nortel, Only $139 when purchased with this kit.

Just connect this torch to a BBQ type propane tank (you may have one in your back yard) and to an oxygen tank. Most people rent this oxygen tank at their local welding supply store. It might typically cost $5.00 per month to rent the tank and about $15.00 to $35.00 each time you have it refilled. It costs about $1.00 per hour to run the Minor Burner torch.

regulator thumb

If you're planning to use an Oxygen Concentrator with your kit or upgrade the hose length, you can adjust these items in your shopping cart. If purchasing the Kit #5 with a Minor Burner, Without an Oxygen Regulator be sure to click the appropriate button below.

Use this kit if you want to start off with a good solid glass bead making setup. You would have all of the same basic tools any professional lamp worker would use to make beads, buttons, or sculptures.

The following items are included in kit# 5:
  • Minor Bench Burner by Nortel - included only $139.00 (or select any other torch - look at the bottom of this page for your choices)
  • Oxygen Regulator
  • Propane Regulator click here for information on regulators
  • Twin Hose Set - Length Upgradeable in Shopping Cart
  • Didymium Safety Glasses - high quality enhanced didymium lens! - the real thing! watch out other web sites are not selling the real didymium in their kits - but some inexpensive "welding" type glasses which do not do what true didymiums do. You can upgrade these glasses in this kit if you want clip ons, large frames, cool looking frames or to add additional protection for working with borosilicate glass or other applications. Click Here to see those glasses. - Upgradeable in Shopping Cart
  • Mandrel Release
  • Mandrels - 1 dozen medium sized diameter
  • Graphite marvering paddle
  • Graphite marvering pad for you table top
  • Sparklighter
  • Rod support - to support your glass rods
  • Glass rod cutter
  • Set of 3 Bead Cleaning Set
You can pick the torch in this kit!* Want to buy this kit and not the torch? Or remove items?
All kits are adjustable within the shopping cart
*With the exception of Kit#4 with Minor Burner.
Minor Bench Burner Torch for making glass sculptures. This kit with the
Minor Burner Torch
Click Here for details

Item #5Minor
Regular Price $464.50

Our Kit Price
$434.50

you save $30

click here to purchase

Click Below to Purchase Kit Without Oxygen Regulator
click here to purchase
Mega Minor Torch This kit with the
Mega Minor Torch
Click Here for details

Item #5Mega

Our Kit Price
$516.00



click here to purchase
Alpha Bethlehem Torch This kit with the
Alpha Torch
Click Here for details

Item #5Alpha

Our Kit Price
$504.00



click here to purchase

Bravo Bethlehem Torch for making glass sculptures This kit with the
Bravo Torch
Click Here for details

Item #5Bravo

Our Kit Price
$1,292.00


click here to purchase

Midrange Torch for making glass sculptures This kit with the
Midrange Torch
Click Here for details

Item #5Mid

Our Kit Price
$580.00


click here to purchase
midrange glass torch for lampworkers glass beadmakers and glassblowers

This kit with the Midrange Surface Mix Torch with Minor Bench Burner mounted on top
Click Here for details Item #5MidMin

Our Kit Price
$690.00


click here to purchase

midrange glass torch for lampworkers glass beadmakers and glassblowers This kit with the Midrange with Mega Minor Bench Burner
mounted on top
Click Here for details

Item #5MidMega

Our Kit Price
$730.00


click here to purchase

Midrange with surface mix torch This kit with the Major Bench Burner Surface Mix Torch with Minor Bench Burner mounted on top
Click Here for details
Item #5MajMin

Our Kit Price
$723.50

with 3/8" hose

click here to purchase
kit #4 with a major burner torch and a mega minor on top This kit with the Major Bench Burner Surface Mix Torch with Mega Minor Bench Burner mounted on top
Click Here for details
Item #5MajMeg

Our Kit Price
$737.50

with 3/8" hose

click here to purchase
Red Max torch for lampworkers glass beadmakers and glassblowers This kit with the Red Max Surface Mix Torch
with Minor Bench Burner mounted oop
Click Here for details
 
Item #5MaxMin

Our Kit Price
$767.50

with 3/8" hose

click here to purchase
Red Max torch for lampworkers glass beadmakers and glassblowers This kit with the Red Max Surface Mix Torch with Mega Minor Torch mounted on top
Click Here for details

Item #5MaxMeg

Our Kit Price
$813.50

with 3/8" hose

click here to purchase
National 8M Torch  This kit with the
National 8M7 Torch
& SM7 Tip
Click Here for details

Item #58M7

Our Kit Price
$547.00



click here to purchase
kit #4 with the mini cc torch This kit with the Carlisle
Mini CC  Torch
Click Here for details

Item #5MCC

Our Kit Price
$506.00


click here to purchase
This kit with the Carlisle
WildCat Torch
Click Here for details

Item #5CWC

Our Kit Price
$737.00


click here to purchase
Kit4 with HellCat burner This kit with the Carlisle
HellCat Torch
Click Here for details

Item#5CHC


Our Kit Price
$1162.00


click here to purchase
You can also order this
Kit without a Torch!


Kit #514 with a 12ft 1/4" hose
Our Low Price
$317.00


click here to purchase

Kit #538 with a 12ft 3/8" hose
Our Low Price
$324.50


click here to purchase
/glass-torch-technology-cricket Kit 4 with any GTT torch, Bobcat, Lynx, Cheetah, Scorpion, Phantom, or Delta please call to order

Oxygen Concentrators NEVER buy Oxygen again! Click Here for Details. An Oxygen Regulator is not needed if you use an Oxygen Concentrator. We can remove the regulator from the kit and adjust the price of the kit. OGSI oxygen concentrator

We recommend the following items to add to your kit:
 Making Glass Beads for instructions on how to make your own glass beads and for setting up your glass studio. How to Make Glass Beads
A how to book by Cindy Jenkins - full color, low cost first beginners book for the glass beadmaker - only $21.95 OR check out the incredible Passing the Flame Book for $75 Click Here to see the books!
45 Piece Moretti/Effetre Rod Set #1654-45 for making glass sculptures, figures, animals, beads and more! Add some glass to your kit

Work Surfaces

For Torch Lampworking, Glassblowing and Glass Bead making


rod rest Troch Mount Dimensions are approximate ± 0.5"
Item # Size Description Price
Stainless Steel work surface for lampworking glass beadmaking and glassblowers #1617
12" x 13"

Stainless Steel Work Surface - 12" x 13" flat area, heavy .030" thick metal. One edge is bent so you can wrap it over the edge of your work bench. The far edge is also bent upright so you have a nice 9" long rest for your colored glass rods.

$16
work surface for lampworking glass beadmaking blassblowing #1636
17" x 18"

Stainless Steel Work Surface - 17" x 18" flat area, heavy thick metal. Actually a bit smaller so we can fit it in a standard box. Front edge is bent so it fits nicely over the edge of your work table. The far edge is also bent upright so you have a nice 18" long rest for your colored glass rods. May need to be shipped in it's own box.

$29
work surface for lampworking glass beadmaking blassblowing #1638
16" x 24"

Stainless Steel Work Surface - 16" x 24" flat area, heavy thick metal. Actually a bit smaller so we can fit it in a standard box. Front edge is bent so it fits nicely over the edge of your work table. The far edge is also bent upright so you have a nice 24" long rest for your colored glass rods. May need to be shipped in it's own box.

$38
worksurface for lampworking glass beadmaking and glassblowing #1644
13" x 18"

Stainless Steel Work Surface - 13" x 18" flat area, heavy thick metal. Actually a bit smaller so we can fit it in a standard box. Front edge is bent so it fits nicely over the edge of your work table. The far edge is also bent upright so you have a nice 18" long rest for your colored glass rods. May need to be shipped in it's own box.

$24
work surface 1659 #1659
16" x 30"

Stainless Steel work surface - actually 16" x 30" flat area, heavy thick metal. Front edge is bent so it fits nicely over the edge of your work table. The far edge is also bent upright so you have a nice 30" long rest for your colored glass rods. May need to shipped in it's own box.

$49
Accessories pictured not included
Morretti Northstar Boroscilicate Pyrex Effetre colored glass rods resting and holding place. Durable, portable, stainless steel, can also go inside your glass bead sculpture kiln Glass Rod Rests This movable rod rest is used to support glass rods to keep them up off the flame worker's workbench for easier grabbing, better organization, and to keep the glass rods cleaner. The rippled edge keeps the rods from rolling around. These durable stainless steel rod holders can also be placed inside a glass bead kiln to support your mandrels.

Item# Description Price
rod and tool rest #RRT8 - 8" Rod rest - fits inside 9" kilns or on your workbench
Volume Pricing
Buy 1 6.00
Buy 2 $5.40
Buy 4 $4.80
Buy 8 $4.20
$6.00

Qty:


tool and rod rest for lampworkers #RRT12 - 12" Rod rest - fits inside 13" kilns or on your workbench
Volume Pricing
Buy 1 $9.00
Buy 2 $8.10
Buy 4 $7.20
Buy 8 $6.30
$9.00
Qty:
tool and rod rest for lampworkers #RRT17 - 17" Rod rest - fits inside 18" kilns or on your workbench
Volume Pricing
Buy 1 $11.00
Buy 2 $9.90
Buy 4 $8.80
Buy 8 $7.70
$11.00
Qty:
tool and rod rest for lampworkers #RRT8T - 8" Rod Rest
Extra Tall
for easy Grabbing

Volume Pricing
Buy 1 $9.00
Buy 2 $8.10
Buy 4 $7.20
Buy 8 $6.30

$9.00
Qty:


tool and rod rest for lampworkers #RRT12T - 12" Rod Rest
Extra Tall
for easy Grabbing

Volume Pricing
Buy 1 $12.00
Buy 2 $10.80
Buy 4 $9.60
Buy 8 $8.40
$12.00

Qty:
rod and tool rest #RRT17T - 17" Rod Rest
Extra Tall
for easy Grabbing

Volume Pricing
Buy 1 $14.00
Buy 2 $12.60
Buy 4 $11.20
Buy 8 $9.80

$14.00
Qty:
glass-rod-rest-lampworking
Difference between standard and tall rod rests.






Looking for something? Torches? Tools? Kilns?
Look in our index. Click on: Sitemap



Tool Caddy
$28.00
Organize your bench top with this handy tool caddy Tool Caddy tool caddy




Register Account | Login
View Account | Logout
Shopping Cart
Secure Shopping
Secure Checkout
Search
Specials!
New Stuff And Sales!
Clearance Items!

Home | About Us | Store Locator | Wholesale Qualifications
Order | Employment Opportunities
Contact Us | Sitemap


Copyright & ™ 2008 Sundance Art Glass. All rights reserved.
Sundance Art Glass, 6052 Foster Rd., Paradise, CA, 95969-3121, USA
Phone: 800-946-8452  |  Phone: 530-872-3021