Pipemakers Kit 420 - Sundance Art Glass
Sundance Art Glass
All Torches Glassblowing Pyrex Lampworking Beadmaking Soft Glass & Hard Glass Nortel Carlisle National GTT Gas Equipment Oxygen Concentrators
Moretti/Effetre Soft Glass Borosilicate Hard Glass/Pyrex Bullseye Glass Dichroic Rods/Tubing Fusing Glass COE 33 COE 90 COE104
Moretti/Effetre Soft Glass Borosilicate/Pyrex Hard Glass Bullseye Dichroic Glassblowing Sculpture Boro
Fusing Bead Borosilicate Pyrex Glassblowing
Glassblowing Pyrex Lampworking Beadmaking Soft Glass Hard Glass Fusing Our Newsletter!
Lampworking Glassblowing Fusing Glass Bead casting
Lampworking Borosilicate Pyrex Glass Bead Soft Glass
Fusing Lampworking Beadmaking Glassblowing
For Fusing For Stained Glass
COE 90 Effetre COE 104 Borosilicate COE 33
Fusing Bead Lampworking Glassblowing Crucible Kiln Kiln Controllers Kiln Pyrometers Kiln Shelves and Posts
Lampworking Soft Glass Beadmaking GlassBlowing Hard Glass Pyrex Pipemaking


Need Your Order
in a Hurry?
For a fee of $10 your order goes ahead of regular orders. If your order is received before 10AM PST, 1PM EST we'll make every effort to see that it goes out the same day
click here to purchase

Sundance Glass
Over 40 years!

Unbeatable Pricing
Unbeatable Quality
Unbeatable Service
Unbeatable Selection


Click Here For Details




Kit #420
Pipemakers Kit

for Making Glass Pipes & Sculptures

The Pipemakers Kit for making glass pipes and small to large glass sculptures. Learn how to make bubblers!

This kit uses the two gas (oxygen and propane) 6B Torch by National.
See below if you want to change out the torch.

Just connect this torch to a BBQ type propane tank (you may have one in your back yard) and to an oxygen tank. Most people rent this oxygen tank at their local welding supply store. It might typically cost $5 per month to rent the tank and about $15 to $35 each time you have it refilled. Use this kit when you want to be assured that you have the set of tools you need to make pipes.

regulator thumbIf your planning to use an Oxygen Concentrator with your kit put a note in your order or give us a call. We will remove the oxygen regulator from the kit. We will then deduct $60 from your order if paying by credit card or refund your PayPal account $60.

(What you get is what is on the list below - the pictures may not be updated)

Kit #420 Includes:

The discounted pricing listed below for this kit applies only when the complete kit is purchased - no substitutions please. If you do not need all of the items in the kit, the items can be purchased separately.

All for Only $451
click here to purchase
You can substitute the torch in this kit. Substitute any torch we sell.
kit #4 with the Minor Torch by Nortel for lampworkers Glass Beadmakers and Glassblowers This kit with the
Minor Burner Torch

Item #420Minor

Regular Price - $503
Our Kit Price - $468
You save $35


click here to purchase

kit #4 with the Mega Minor Torch by Nortel for lampworkers Glass Beadmakers and Glassblowers This kit with the
Mega Minor Torch

Item #420Mega

Regular Price - $533
Our Kit Price - $498
You save $35


click here to purchase
kit #4 with the Minor Torch by Nortel for lampworkers Glass Beadmakers and Glassblowers This kit with the
Alpha Torch

item #420Alpha

Regular Price-$483

Our Kit Price -$448
You save $35

click here to purchase

  kit #4 with the Bravo torch by Bethlehem for lampworkers Glass Beadmakers and Glassblowers This kit with the
Bravo Torch

item #420Bravo

Regular Price-$1033

Our Kit Price-$998
You save $35
click here to purchase

Midrange Torch for making glass sculptures. This kit with the
Midrange Torch

Item #420Mid

Regular Price - $603

Our Kit Price - $568
you save $35

click here to purchase
midrange glass torch for lampworkers glass beadmakers and glassblowers This kit with the Midrange Surface Mix Torch with Minor Bench Burner mounted on top

It
em #420MidMin

Regular Price - $721

Our Kit Price - $686
you save $35

click here to purchase

midrange glass torch for lampworkers glass beadmakers and glassblowers This kit with the Midrange with Mega Minor Bench Burner
mounted on top

Item #420MidMega

Regular Price - $767

Our Kit Price - $732
you save $35

click here to purchase

midrange glass torch for lampworkers glass beadmakers and glassblowers This kit with the Midrange
Pre Mix Torch

Item #420MidPre

Regular Price - $721

Our Kit Price - $686
you save $35

click here to purchase
major glass torch for lampworkers glass beadmakers and glassblowers This kit with the Major Bench Burner Surface Mix Torch with Minor Bench Burner mounted on top

I
tem #420MajMin

Regular Price - $741

Our Kit Price - $706
with 3/8" hose - you save $35

click here to purchase

kit #4 with a major burner torch and a mega minor on top This kit with the Major Bench Burner Surface Mix Torch with Mega Minor Bench Burner mounted on top

Item #420MajMeg

Regular Price - $762

Our Kit Price - $727
with 3/8" hose - you save $35
click here to purchase
kit #4 with a major burner torch and a pre mix on top This kit with the Major Bench Burner Premix Torch

Item #420MajPre

Regular Price - $741

Our Kit Price - $706
with 3/8" hose - you save $35

click here to purchase

Red Max torch for lampworkers glass beadmakers and glassblowers This kit with the Red Max Surface Mix Torch
with Minor Bench Burner mounted on top

Item #420MaxMin

Regular Price - $841

Our Kit Price - $806
with 3/8" hose - you save $35
click here to purchase
 
Red Max torch for lampworkers glass beadmakers and glassblowers This kit with the Red Max Surface Mix Torch with Mega Minor Torch mounted on top

Item #420MaxMeg

Regular Price - $891

Our Kit Price - $856
with 3/8" hose - you save $35

click here to purchase
  Red Max torch for lampworkers glass beadmakers and glassblowers This kit with the Red Max Premix Torch

Item #420MaxPre

Regular Price - $841

Our Kit Price - $806
with 3/8" hose - you save $35

click here to purchase
kit #4 with the 8m torch and the sm7 tip This kit with the
National 8M7 Torch
& SM7 Tip

Item #4208M7
Regular Price $561

Our Kit Price - $526
You Save $35

click here to purchase
National 8M +HTC3 Tip when working with borosilicate/pyrex/hard glass in making glass sculptures. This kit with National 8M HTC1 Tip

Item #4208M2

Regular Price $601

Our Kit Price - $566
You Save $35

click here to purchase
kit #4 with the national 6b torch and htc1 tip This kit with the National
6B Torch and the popular HTC1 Tip

Item #4206B

Regular Price - $486

Our Kit Price - $451

click here to purchase

   kit #4 with the Red Max Glass Torch by Nortel with the pre mix top torch This kit with the
Red Rocket Torch
With the Premix Sidefire
Item #420RocPre

Regular Price - $1427

Our Kit Price - $1392
with 3/8" hose - you save $35

click here to purchase
kit #4 with the mini cc torch This kit with the Carlisle
Mini CC Torch

Item#420MCC

RegularPrice
$522

Our Kit Price
$487


click here to purchase
  This Kit with the Carlisle WildCat Torch

Item#420CWC

Regular Price-$747

Our Kit Price-$673

click here to purchase
Kit4 with HellCat burner This Kit with the Carlisle HellCat Torch

Item#420CHC

Regular Price-$1172

Our Kit Price-$1138


click here to purchase
  Kit4 with Black Widow This Kit with the Carlise Black Widow Torch

Item#420CBW

Regular Price-$1766

Our Kit Price-$1731


click here to purchase
Mini Milon by Nortel This Kit with the Nortel Mini Milon PreMix Torch

Item#420NMM

Our Regular Price-$526

Our Kit Price-$521


click here to purchase
    You can also order this
Kit without a Torch!
These kits may also be edited once you place the Kit in shopping cart


Kit #42014 with a 12ft 1/4" hose
Our Low Price - $335

click here to purchase

Kit #42038 with a 12ft 3/8" hose
Our Low Price - $342

click here to purchase





Flashback Arrestor for preventing the torch flame from going down the hose to the gas tank.Optional

Flashback Arrestors

Flashback Arrestors - This is not required to operate your torch. It is a recommended safety device. In some rare situations, a flame can travel back down a hose to the gas tank and cause an explosion. This device helps prevent this reverse gas flow and flashback. This device uses a reverse flow check valve and a flame arrestor that stops this flashback flame. Packaged and priced with both an oxygen and a propane arrestor. Gas flow is in one direction only. Arrow showing gas flow direction is stamped on the side of the flashback arrestor.


Item # FA30 - $59

click here to purchase

 


Oxygen Concentrator

If you are going to use an oxygen concentrator, (instead of an oxygen tank) you do not need an oxygen regulator. It is OK to purchase any of our kits without the oxygen regulator. Subtract $50 off the price of any kit. If you want a great deal on an oxygen concentrator Click Here.

Never have to buy Oxygen AGAIN!!

Oxygen Concentrator

$399

Click Here for Details

Oxygen concentrator from generating/concentrating your own oxygen. Never have to buy oxygen again!



Torch Substitutions

We have other torches available if you'd like to substitute them in your kit. Call us at 800-946-8452
and let us know which torch you'd like to substitute and we will adjust the price accordingly.

Click here to see the torches we carry.


Add to your kit:

Let us pull a selection of Tubing and Colored Rod for you. We know exactly what you need. Choose $50 worth or $100 worth or $200.

Click here to see:

  • more about Borosilicate clear glass rod and tubing and
  • more about colored rod
Add to your kit:
Making Glass Pipes
Add to your glass pipe making kit a video for learning how to make glass pipes.
Click here to see videos on how to make glass pipes

Work Surfaces

For Torch Lampworking, Glassblowing and Glass Bead making


rod rest Troch Mount Dimensions are approximate ± 0.5"
Item # Size Description Price
Stainless Steel work surface for lampworking glass beadmaking and glassblowers #1617
12" x 13"

Stainless Steel Work Surface - 12" x 13" flat area, heavy .030" thick metal. One edge is bent so you can wrap it over the edge of your work bench. The far edge is also bent upright so you have a nice 9" long rest for your colored glass rods.

$16
work surface for lampworking glass beadmaking blassblowing #1636
17" x 18"

Stainless Steel Work Surface - 17" x 18" flat area, heavy thick metal. Actually a bit smaller so we can fit it in a standard box. Front edge is bent so it fits nicely over the edge of your work table. The far edge is also bent upright so you have a nice 18" long rest for your colored glass rods. May need to be shipped in it's own box.

$29
work surface for lampworking glass beadmaking blassblowing #1638
16" x 24"

Stainless Steel Work Surface - 16" x 24" flat area, heavy thick metal. Actually a bit smaller so we can fit it in a standard box. Front edge is bent so it fits nicely over the edge of your work table. The far edge is also bent upright so you have a nice 24" long rest for your colored glass rods. May need to be shipped in it's own box.

$38
worksurface for lampworking glass beadmaking and glassblowing #1644
13" x 18"

Stainless Steel Work Surface - 13" x 18" flat area, heavy thick metal. Actually a bit smaller so we can fit it in a standard box. Front edge is bent so it fits nicely over the edge of your work table. The far edge is also bent upright so you have a nice 18" long rest for your colored glass rods. May need to be shipped in it's own box.

$24
work surface 1659 #1659
16" x 30"

Stainless Steel work surface - actually 16" x 30" flat area, heavy thick metal. Front edge is bent so it fits nicely over the edge of your work table. The far edge is also bent upright so you have a nice 30" long rest for your colored glass rods. May need to shipped in it's own box.

$49
Accessories pictured not included
Morretti Northstar Boroscilicate Pyrex Effetre colored glass rods resting and holding place. Durable, portable, stainless steel, can also go inside your glass bead sculpture kiln Glass Rod Rests This movable rod rest is used to support glass rods to keep them up off the flame worker's workbench for easier grabbing, better organization, and to keep the glass rods cleaner. The rippled edge keeps the rods from rolling around. These durable stainless steel rod holders can also be placed inside a glass bead kiln to support your mandrels.

Item# Description Price
rod and tool rest #RRT8 - 8" Rod rest - fits inside 9" kilns or on your workbench
Volume Pricing
Buy 1 6.00
Buy 2 $5.40
Buy 4 $4.80
Buy 8 $4.20
$6.00

Qty:


tool and rod rest for lampworkers #RRT12 - 12" Rod rest - fits inside 13" kilns or on your workbench
Volume Pricing
Buy 1 $9.00
Buy 2 $8.10
Buy 4 $7.20
Buy 8 $6.30
$9.00
Qty:
tool and rod rest for lampworkers #RRT17 - 17" Rod rest - fits inside 18" kilns or on your workbench
Volume Pricing
Buy 1 $11.00
Buy 2 $9.90
Buy 4 $8.80
Buy 8 $7.70
$11.00
Qty:
tool and rod rest for lampworkers #RRT8T - 8" Rod Rest
Extra Tall
for easy Grabbing

Volume Pricing
Buy 1 $9.00
Buy 2 $8.10
Buy 4 $7.20
Buy 8 $6.30

$9.00
Qty:


tool and rod rest for lampworkers #RRT12T - 12" Rod Rest
Extra Tall
for easy Grabbing

Volume Pricing
Buy 1 $12.00
Buy 2 $10.80
Buy 4 $9.60
Buy 8 $8.40
$12.00

Qty:
rod and tool rest #RRT17T - 17" Rod Rest
Extra Tall
for easy Grabbing

Volume Pricing
Buy 1 $14.00
Buy 2 $12.60
Buy 4 $11.20
Buy 8 $9.80

$14.00
Qty:
glass-rod-rest-lampworking
Difference between standard and tall rod rests.






Looking for something? Torches? Tools? Kilns?
Look in our index. Click on: Sitemap



Tool Caddy
$28.00
Organize your bench top with this handy tool caddy Tool Caddy tool caddy




Register Account | Login
View Account | Logout
Shopping Cart
Secure Shopping
Secure Checkout
Search
Specials!
New Stuff And Sales!
Clearance Items!

Home | About Us | Store Locator | Wholesale Qualifications
Order | Employment Opportunities
Contact Us | Sitemap


Copyright & ™ 2008 Sundance Art Glass. All rights reserved.
Sundance Art Glass, 6052 Foster Rd., Paradise, CA, 95969-3121, USA
Phone: 800-946-8452  |  Phone: 530-872-3021