Mid-Range Burner by Nortel and Accessories - Wholesale - Sundance Art Glass Center
Sundance Art Glass
All Torches Glassblowing Pyrex Pipemaking Lampworking Beadmaking Soft Glass & Hard Glass Nortel Carlisle National GTT Gas Equipment Oxygen Concentrators Torch Tips
Moretti/Effetre Soft Glass Borosilicate Hard Glass/Pyrex Bullseye Glass Dichroic Rods/Tubing Fusing Glass COE 33 COE 90 COE104
Moretti/Effetre Soft Glass Borosilicate/Pyrex Hard Glass Bullseye Dichroic Glassblowing Sculpture Boro
Fusing Bead Borosilicate Pyrex Pipemaking Glassblowing
Glassblowing Pyrex Pipemaking Lampworking Beadmaking Soft Glass Hard Glass Fusing Our Newsletter!
Lampworking Glassblowing Fusing Glass Bead casting
Lampworking Borosilicate Pyrex Glass Bead Soft Glass
Fusing Lampworking Beadmaking Glassblowing
For Fusing For Stained Glass
COE 90 Effetre COE 104 Borosilicate COE 33
Fusing Bead Lampworking Glassblowing Crucible Kiln Kiln Controllers Kiln Pyrometers Kiln Shelves and Posts
Lampworking Soft Glass Beadmaking GlassBlowing Hard Glass Pyrex Pipemaking


Need Your Order
in a Hurry?
For a fee of $10 your order goes ahead of regular orders. If your order is received before 10AM PST, 1PM EST we'll make every effort to see that it goes out the same day
click here to purchase

Sundance Glass
Over 40 years!

Unbeatable Pricing
Unbeatable Quality
Unbeatable Service
Unbeatable Selection


Click Here For Details





Our 1602 Midrange Series Torches


Torches for glass lamp workers, bead makers, flame workers,
glass blowers, and marble makers



Choose between four torch styles.

1) Bottom Tip/Flame only - No second top Tip/Flame
2) With a Surface Mix top Tip - Minor Burner
3) With a Surface Mix top Tip - Mega Minor Burner
4) With a Pre-Mix top Tip/Flame
Bottom Tip/Flame is the same on all four torch. The bottom torch tip is Adjustable!
You can get a fairly small pointed flame or change to a larger bushy flame by adjusting the torch valves!

REMEMBER
  • Surface Mix Tip works with all kinds of glass. Soft and Hard.
  • Pre-Mix Mix Tips only work with Borosilicate Hard Glass (Pyrex) but is faster working.
To see a similar torch, see the National 8M torch for $199! Click Here
   Item  
no top torch surface mix bottom torch for bead making, pipe making, sculpture making, marble making, ornament making Midrange Burner
One bottom burner

Order Number 16025


$263

click here to purchase
13mm torch tip for flameworking torch, beadmaking torch, scultpuring torch, pipe making torch
Midrange Burner
With minor burner surface mix top torch mounted on top

Order Number 16026

$425


click here to purchase
interchangeable pre-mix tips for making glass sculptures with a torch Midrange Burner
With pre-mix top torch mounted on top - Includes interchangeable and replaceable tip - extra tips listed below

Order Number 16027

$425


click here to purchase
torch pre-mix top burner, surface mix bottom burner, for flameworking, sculpture making, pipe making, bead making, ornament making
mega minor burner torch by nortel for lampworking, glass beadmaking and glassblowing Midrange Burner
With mega minor burner surface mix top torch mounted on top

Identical to the 16026 but with slightly larger orifice holes on the top tip.

Order Number 16028

$475


click here to purchase
midrange glass torch by nortel for lampworking, glass beadmaking and glassblowing

Item#  
red rocket torch mounted marvering pad Torch Mounted Marvering Pad
Puts a graphite marvering pad in your work area close to the flame. Very sturdy.
Lifetime Sundance Warranty.
Made in the USA
#1401      $46         click here to purchase
red rocket torch mounted marvering pad red rocket torch mounted marvering pad red rocket torch mounted marvering pad
This Torch Mounted Marvering Pad fits:
Midrange - with both styles with top torch
  Torch Mounted Marvering Pad for
MidRange WITHOUT that top second torch - order this one
Made in the USA
#1402      $29             click here to purchase

You need the following studio equipment to use this torch:
  1. Oxygen Regulator - Prices are below
  2. Propane Regulator - Prices are below
  3. Hose - Prices below details and setup
  4. Oxygen and Propane Tanks - details

Torch TIPS for the 16027

Torch tip ox-1, torch tip ox-2, torch tip ox-3, torch tip ox-4, torch tip ox-5

Single Orifice

Order #

Description  Hole size in inches Price
OX-00 One Hole - Smallest size  .020 $19
OX-0 One Hole - Smallest size  .032 $17
OX-1 One Hole  .042 $15
OX-2 One Hole  .055 $12
OX-3 One Hole  .07 $12
OX-4 One Hole  .082 $12
OX-5 One Hole - Largest size  .1 $12

Thread size 7/16-24


torch tip htm-0, torch tip htm-1, torch tip  htm-2, torch tip htm-3, torch tip htc-0, torch tip  htc-1, torch tip  htc-3

Multiple Orifice

Order #

Description Price
HTM-0 7 holes - each .04 inch diameter holes $31
HTM-1 9 holes - each .04 inch diameter holes $31
HTM-2 9 holes - each .048 inch diameter holes $31
HTM-03 9 holes - each .055 inch diameter holes $31

Order #

Description Price
HTC-0 7 holes - Silent Burn $30
HTC-1 12 holes - Silent Burn $32
HTC-2 19 holes - Silent Burn $37
HTC-3 31 holes - Silent Burn click here to see the HT3 tip fired up $42

Thread size 7/16-24

CAUTION - all torch tips are subject to burning out if you have an improper torch adjustment. The HT-2 and HT-3 are the most sensitive tips to burning out and these are not recommended for beginners who are learning how to adjust their glass art torches properly - therefore these and all torch tips are not guaranteed from burning out. Please see the person who instructed you to learn the proper torch adjustment. 









Gas Equipment

For lampworkers, Glass Beadmakers and Glassblowers

Sundance Art Glass M5 Oxygen Concentrator Oxygen Concentrators
Click Here to see our Oxygen Generator Systems International (OGSI) Oxygen Concentrators

Foot Pedals foot pedalfoot pedal Click here to see our foot pedals

Gas Regulators

Two regulators are required when you use a two gas, (oxygen and propane) torch. They fit between the gas tanks and the gas hose. None are needed if you are using the Hot Head torch. Oxygen Regulator is not needed if you are using an Oxygen Concentrator.

Item# Description Price
regulator-oxygen-lampworking-glass-beadmaking-glassblowing OXYGEN REGULATOR
Two gauge. One Stage - Click Here for information about regulators, about OUR regulators and warranty.

Inlet CGA 540. Outlet male "B" fitting.

Order Number REB93
List Price: $85 Our Low
Price:$77

click here to purchase
regulator-fuel-lampworking-glass-beadmaking-glassblowing FUEL GAS REGULATOR - Propane, Propylene, or Acetylene
Two gauge. One Stage -  Click here for information about regulators, about OUR regulators and warranty.

Inlet CGA 510. Outlet male "B" fitting.

Order Number REB11
List Price: $85
Our Low
Price: $77

click here to purchase
regulator-hydrogen-lampworking-glass-beadmaking-glassblowing-lg HYDROGEN FUEL REGULATOR -
Order Number REB01
Requires A hose fittings
List Price: $86
Our Low
 Price:$59
click here to purchase
Priced to sell!
More than 30% off!!!
regulator-hydrogen-lampworking-glass-beadmaking-glassblowing-lg HIGH PRESSURE OXYGEN REGULATOR -
For torches that consume 25 PSI or more.
Will run up to approximately 50 PSI
Order Number REB00
Requires B hose fitting
List Price: $105
Our Low
Price: $85
click here to purchase




Gas Hoses Gas Twin Hose Set

Use this hose when you use a two gas torch (oxygen and propane). To attach torch, push the cut ends onto the torch and secure with a hose clamp. These are twin hose sets, one for oxygen and one for propane. The brass end of the hoses are attached to the gas regulators. Propane hose fittings are left handed threads and colored red and oxygen is right handed and colored green - This prevents a mix-up when attaching hoses.


CAUTION Do not use the easy to find oxygen/acetylene type hoses. The propane gas will rot them. The hoses we sell are made for all types of gas including propane. Hose ends have female brass fittings.


Item # Length Ends of hose - hose diameter Price
T124 12 ft (3.7 meters) Female "B" fitting one side and cut end of hose other side
1/4" diameter hose
$22
click here to purchase
T254 25 ft (7.7 meters) Female "B" fitting on both ends
1/4" diameter hose
$34
click here to purchase

The below larger diameter hose is only used if when you need a large hose to fit over the large inlet fittings on some torches. (You can get the smaller 1/4" hose listed above on these large inlet fittings with a bit of effort. A trick is to immerse the end of the hose in very hot water to soften the end.)

Order #

Length Ends of hose - hose diameter Price
T128 12 ft (3.7 meters) Female "B" fitting one side and cut end of hose other side
3/8" diameter hose
$29.50
click here to purchase
T258 25 ft (7.7 meters) Female "B" fitting on both ends
3/8" diameter hose
$52.00
click here to purchase


Y - Connectors for Hose


Gas Y Connectors
Y Connector - Connect this fitting at the output of the regulator and attach two hoses so you can use two torches from the same tank. Oxygen and propane Y are packaged and priced separately.

Y Connector with valves - Same as the Y connector described above except has two on/off valves, one for each hose.

Item# Description Output end Input end Price
101 Y hose connector (oxygen) hose (B fitting) Oxygen regulator $19.50
click here to purchase
102 Y hose connector (propane) hose (B fitting) Propane regulator $19.50
click here to purchase
111V Y hose connector with valve (Oxygen) hose (B fitting) Oxygen regulator $32.50
click here to purchase
112V Y hose connector with valve (Propane) hose (B fitting) Propane regulator $32.50
click here to purchase

* The FA30 connects between the regulator and the gas hose and is more commonly used.


Caps for "B" Size Hose


Gas Caps
The safe and proper way to cap of the end of a fitting. Available for Oxygen and Fuel


Item# Description Price
927 Cap For "B" Size Hose-Oxygen $3.95
click here to purchase
928 Cap For "B" Size Hose-Fuel $3.95
click here to purchase

Flashback Arrestors


Flashback Arrestors
In some rare situations, a flame can travel back down a hose to the gas tank and cause an explosion.

This device helps prevent this reverse gas flow and flashback by using a reverse flow check valve and a flame arrestor.

Packaged and priced with both an oxygen and a propane arrestor.


Item# Description Output End Input End Price
FA-30 flash back arrestors
Flashback Arrestors (pair of oxygen and fuel gas)

Connects directly to the regulator. This arrestor is the easiest to connect and the most popular.

Item #FA30
Male B size gas hose fitting Female B size gas hose fitting $56.00
FA-10 flash back arrestors
Flashback Arrestors (pair of oxygen and fuel gas)

Connects directly to the fittings on a torch like the 3AB, 8M and Carlisle. We also include the fitting so you can put this arrestor in the middle of your twin hose. You may also need the A2 fittings listed below.

Item #FA10
Female B size hose fitting
Male B size fitting using the included adaptor
Male B size hose fitting $56.00 click here to purchase
hose fittings
1/4" Barbed Hose Fittings for Torch

For use with torches that have B (screw on) fittings to accomodate cut-end hoses. Insert barbed fitting into cut end of hose and secure with included hose clamp. Be sure to check for leaks.

Item #A2
One side Female B size hose fitting Other side a barb that fits in a 1/4" gas hose - use a hose clamp $5.00
hose fittings
3/8" Barbed Hose Fittings for Torch

For use with torches that have B (screw on) fittings to accomodate cut-end hoses. Insert barbed fitting into cut end of hose and secure with included hose clamp. Be sure to check for leaks.

Item #A3
One side Female B size hose fitting Other side a barb that fits in a 3/8" gas hose - use a hose clamp $5.00
fitting hose to hose
Oxygen and Fuel Gas Fittings

Allows you to connect a hose to another hose to make a longer hose (hoses need B size fittings)

Item #A30 (Oxygen)
Item #A31 (Fuel)
Male B size gas hose fitting Male B size gas hose fitting A30 $1.50

A31 $1.50 ea

Note: Flashback arrestors have an arrow stamped on them to indicate the gas flow direction.
Works in only one direction.
 
flashback arrestors
  A2 optional, not always needed and are not included.

* The FA30 connects between the regulator and the gas hose and is more commonly used. Requires B size fittings on hose.


QDF30

Four Functions in a single item.
  • A flashback arrestor
  • A quick connect and disconnect
  • An automatic shutoff valve
  • An internal reverse flow check valve all

Shorter and less expensive than if purchased separately.
Combination Flashback Arrestor and Quick Connect
Item# QDF30 - $89.00




Leak Detection Fluid

Item# Description Price
leak detection fluid
LT100
Leak Detection Fluid 4oz bottle

A must if you assemble your gas equipment. Use when connecting gas hoses, regulators, torches, flashback arrestors, quick connects, etc.

After tightening your fittings, pressurize your gas line. Then dribble a few drops on every fitting. If there is a leak, you will see bubbles at the leaky fitting. You may hear about using soap to check for leaks. It is VERY DANGEROUS! Many soaps have oil in it and oil + pressurized oxygen can be very dangerous. Google it! This liquid is specially formulated just for this purpose and is the only liquid you should use for checking gas leaks.

$6.95
click here to purchase

Hose Quick Connects



Makes an easy job out of disconnecting and reconnecting your torch.

Disconnect your torch switching to a different torch or to put it away for safe keeping.

Great for quick classroom set up and take down.

Item# Description Input end is a Output end is a Price
QDB10 Quick Connects (pair) Male B gas hose fitting Female B fitting $54
QDB20 Quick Connects (pair)
usually used for hose to hose connection
Male B gas hose fitting Male B gas hose fitting $54
QDB30 Quick Connects (pair) Female B fitting
usually connects to Regulator
Male B hose fitting $54


Manifold Gas System


Gas Manifold

Connect up to six torches to the same gas supply with this manifold system. Included are enough fittings and plugs to make 2 to 6 hose connections. Two manifolds are required, one for oxygen and one for propane. All Brass.

Custom Manifold Systems:
We can help you figure out which parts you would need for your system and pre assemble for no extra charge. Systems might also include quick connects and flashback arrestors.

Item# Description Price
M6 Manifolds system, Includes 1 block, 7 fittings and 4 plugs - two required - specify Oxygen or Propane $57.50



Item# Description Price
MB7 Manifold block only, works with oxygen or gas $39.00
32 Extra Fitting - one side fits in the manifold block, other side fits a standard right handed thread oxygen "B" size hose fitting. $1.50
33 Extra Fitting - one side fits in the manifold block, other side fits a standard left handed thread gas "B" size hose fitting. Gas fittings have a "line notch" stamped into the nut part of the fitting to identify it as left handed threading. $1.50
P41P Extra Plug - plugs unused outlets in the manifold block $2.00

Manifold for 3 torches

Manifold setup for 3 torches.





Manifold Splitters



Splitters allow you to run more than one regulator. If your running multiple torches off one tank this allows
different pressures to each torch Click here for a better description and to see how they work.

Item Description Price
Propane Splitter
F271735
Propane Splitter with Check Valves. Run more than one Regulator $32.00
Propane Splitter
T15
 Propane Splitter. Run more than one regulator, no check valves $39.00



Spark Lighter


Order# Description Price
1501 Used to light torches. Squeeze the handles together to cause a spark. $3.00



Work Surfaces

For Torch Lampworking, Glassblowing and Glass Beadmaking

Propane Bottle Holder with Work Surface

Holds your disposable MAPP or propane bottle safely and at the correct angle for your torch . We recommend the Hot Head Torch. Torch height is adjustable . Includes a built in tool and glass rod rest . All rust proof series 300 stainless steel . Holder holds both the wide and narrow shaped gas tank . Should be clamped or screwed to the table . Lower section is cut in to give you more leg room . Lower part that holds tank can be bent to adjust the torch angle . Torch and & nbsp; propane tank not included . Dimensions are approximate . Made in the USA

Description Price
Propane / Mapp bottle holder and work surface

#1645

Holds both the narrow and wide style bottles.

9" x 14"
$24
worksurface for lampworking glassblowing glass beadmaking Propane / Mapp bottle holder and work surface

#1650

Holds both the narrow and wide style bottles.

14" x 18"

Includes an 18" built on rod rest.
$39
click here to purchase



Work Surfaces

Protect your work table. A comfortable pair of padded foam armrests and worksurface and rod rest all in one! All stainless steel. Pictured with a Minor Burner not included.

Dimensions are usually close but can vary a bit - plus or minus a 1/2" or so.
Size Description Price
Stainless Steel work surface for lampworking glass beadmaking and glassblowers #1617
12"x 13"
Stainless Steel Work Surface - 12" x 13" flat area, heavy .030" thick metal. One edge is bent so you can wrap it over the edge of your work bench. The far edge is also bent up right so you have a nice 9" long rest for your colored glass rods. $16
work surface for lampworking glass beadmaking blassblowing #1636
17
" x 18"
Stainless Steel Work Surface - 17" x 18" flat area, heavy thick metal. Actually a bit smaller so we can fit it in a standard box. Front edge is bent so it fits nicely over the edge of your work table. The far edge is also bent up right so you have a nice 18" long rest for your colored glass rods.beige May need to be sent in it's own box. $29
work surface for lampworking glass beadmaking blassblowing #1638
16" x 24"
Stainless Steel Work Surface - 16" x 24" flat area, heavy thick metal. Actually a bit smaller so we can fit it in a standard box. Front edge is bent so it fits nicely over the edge of your work table. The far edge is also bent up right so you have a nice 24" long rest for your colored glass rods.beige May need to be sent in it's own box. $38
worksurface for lampworking glass beadmaking and glassblowing #1644
13" x 18"
Stainless Steel Work Surface - 13" x 18" flat area, heavy thick metal. Actually a bit smaller so we can fit it in a standard box. Front edge is bent so it fits nicely over the edge of your work table. The far edge is also bent up right so you have a nice 18" long rest for your colored glass rods.beige May need to be sent in it's own box. $24
work-surface-1649sm-torch-lampworking-glassblowing
need new pic
#1659
16"x 30"
Stainless Steel work surface - actually 16" x 30" flat area, heavy thick metal. Front edge is bent so it fits nicely over the edge of your work table. The far edge is also bent up right so you have a nice 30" long rest for your colored glass rods. PLUS if this is shipped, it must go in it's own box. $49

Accessories pictured not included.
Morretti Northstar Boroscilicate Pyrex Effetre colored glass rods resting and holding place. Durable, portable, stainless steel, can also go inside your glass bead sculpture kiln Glass Rod Rests
This movable rod rest is used to support glass rods to keep them up off the flame worker's workbench for easier grabbing, better organization, and to keep the glass rods cleaner. The rippled edge keeps the rods from rolling around. These durable stainless steel rod holders can also be placed inside a glass bead kiln to support your mandrels.

Item# Descriptionbeige Price
rod and tool restbeige #RRT8 - 8" Rod rest - fits inside 9" kilns or on your workbench
Volume Pricing
Buy 1 6.00
Buy 2 $5.40
Buy 4 $4.80
Buy 8 $4.20
$6.00

Qty:


tool and rod rest for lampworkers #RRT12 - 12" Rod rest - fits inside 13" kilns or on your workbench

Volume Pricing
Buy 1 $9.00
Buy 2 $8.10
Buy 4 $7.20
Buy 8 $6.30
$9.00
Qty:
tool and rod rest for lampworkers #RRT17 - 17" Rod rest - fits inside 18" kilns or on your workbench

Volume Pricing
Buy 1 $11.00
Buy 2 $9.90
Buy 4 $8.80
Buy 8 $7.70
$11.00
Qty:
tool and rod rest for lampworkers #RRT8T - 8" Rod Rest
Extra Tall
for easy Grabbing

Volume Pricing
Buy 1 $9.00
Buy 2 $8.10
Buy 4 $7.20
Buy 8 $6.30

$9.00
Qty:


tool and rod rest for lampworkers #RRT12T - 12" Rod Rest
Extra Tall
for easy Grabbing

Volume Pricing
Buy 1 $12.00
Buy 2 $10.80
Buy 4 $9.60
Buy 8 $8.40
$12.00

Qty:
rod and tool rest #RRT17T - 17" Rod Rest
Extra Tall
for easy Grabbing

Volume Pricing
Buy 1 $14.00
Buy 2 $12.60
Buy 4 $11.20
Buy 8 $9.80

$14.00
Qty:
glass-rod-rest-lampworking
Difference between standard and tall rod rests.






Looking for something? Torches? Tools? Kilns?
Look in our index. Click on: Sitemap



Tool Caddy
$28.00



Organize your bench top with this handy tool caddy

Tool Caddy



Register Account | Login
View Account | Logout
Shopping Cart
Secure Shopping
Secure Checkout
Search
Specials!
New Stuff And Sales!
Clearance Items!

Home | About Us | Store Locator | Wholesale Qualifications
Order | Employment Opportunities
Contact Us | Sitemap


Copyright & ™ 2008 Sundance Art Glass. All rights reserved.
Sundance Art Glass, 6052 Foster Rd., Paradise, CA, 95969-3121, USA
Phone: 800-946-8452  |