Ceramic Slumping Molds
Item # 487124
This round, ceramic slumping mold is intended for glass fusing applications. With this
mold you can make a fluted sunburst dish. It measures 6" in diameter and 3/4" in
depth, and the bottom flares to 6".
1. Check sizes - Be sure double check the actual size of your mold before you
cut the glass you are slumping, as all molds are slightly variable in size.
2. Prefiring - Prefiring is recommended, especially for molds larger than 30
centimeters. Fire the kiln at 90° Fahrenheit up to 1470°
Fahrenheit with no holding time. Cool down the mold in the kiln.
3. Kiln wash - Brush or spray the kiln wash on the mold and let it dry for approximately
20 minutes in the kiln at 400° Fahrenheit. Make sure the vent holes in the mold
are open. Replace the kiln wash every 3rd or 4th firing, or when necessary.
4. When you slump your glass, place your mold on kiln posts. The distance between the
mold and the heating elements should be no less than 2-3 centimeters.
5. Ceramic molds, like glass, are susceptible to thermal shock and should not be heated
or cooled too rapidly. Special attention is advised when using sidefiring kilns.