Need Your Order in a Hurry?
For a fee of $10 your order goes ahead of regular orders. If your order is received before 10AM PST, 1PM EST we'll make every effort to see that it goes out the same day
Sundance Glass
Over 40 years!
Unbeatable Pricing Unbeatable Quality Unbeatable Service Unbeatable Selection
for Glass Lampworkers, Beadmakers,
Flameworkers, Glassblowers and Marblemakers
The Phantom torch is a 2 stage torch that uses the powerful Lynx 7 Jet for the center fire with a ring of 15 jets for the outer fire. This completely surface mix torch uses the patented Triple Mix technology to provide unparalleled flame chemistry for all types of glass.
The Phantom is the first of the 2 stage Triple Mix torches in the lineup. It is great for soft or hard glass with the ability to produce many flame types from a soft bushy flame to a hard driving flame. The flame chemistry that is achieved with the Triple Mix technology has a wide range including a fuel rich reduction flame, a neutral flame, an oxygen rich oxidizing flame, and an over-oxidizing flame. These flame types make any type, color or effect of glass easy to work and manipulate.
Surface mix tips work with all kinds of glass, soft and hard. This torch is a surface mix torch. Pre-Mix tips only work with borosilicate hard glass (Pyrex) but are faster working.
Description
Price
The Phantom - 4 Stud*
$1200
The Phantom - Torch Mounted Marvering Pad
$29
*Four Ports are used when you want to use a foot pedal. If you don't have a foot pedal now but want the option to use one later than you can temporarily plumb the 4 port to a 2 port using a little hose and a pair of Y connectors.
Gas Equipment
For lampworkers, Glass Beadmakers and Glassblowers
Oxygen Concentrators Click Here to see our Oxygen Generator Systems International (OGSI) Oxygen Concentrators
Two regulators are required when you use a two gas, (oxygen and propane) torch. They fit between the gas tanks and the gas hose. None are needed if you are using the Hot Head torch. Oxygen Regulator is not needed if you are using an Oxygen Concentrator.
Item#
Description
Price
OXYGEN REGULATOR Two gauge. One Stage - Click Here for information about regulators, about OUR regulators and warranty.
Inlet CGA 540. Outlet male "B" fitting.
Order Number REB93
List Price: $85Our Low Price:$77
FUEL GAS REGULATOR - Propane, Propylene, or Acetylene Two gauge. One Stage - Click here for information about regulators, about OUR regulators and warranty.
Inlet CGA 510. Outlet male "B" fitting.
Order Number REB11
List Price: $85 Our Low Price: $77
HYDROGEN FUEL REGULATOR -
Order Number REB01 Requires A hose fittings
List Price: $86 Our Low Price:$59 Priced to sell!
More than 30% off!!!
HIGH PRESSURE OXYGEN REGULATOR -
For torches that consume 25 PSI or more. Will run up to approximately 50 PSI Order Number REB00 Requires B hose fitting
List Price: $86 Our Low Price: $75
Gas Hoses
Use this hose when you use a two gas torch (oxygen and propane). To attach torch, push the cut ends onto the torch and secure with a hose clamp. These are twin hose sets, one for oxygen and one for propane. The brass end of the hoses are attached to the gas regulators. Propane hose fittings are left handed threads and colored red and oxygen is right handed and colored green - This prevents a mix-up when attaching hoses.
CAUTION Do not use the easy to find oxygen/acetylene type hoses. The propane gas will rot them. The hoses we sell are made for all types of gas including propane. Hose ends have female brass fittings.
Item #
Length
Ends of hose - hose diameter
Price
T124
12 ft (3.7 meters)
Female "B" fitting one side and cut end of hose other side 1/4" diameter hose
$22
T254
25 ft (7.7 meters)
Female "B" fitting on both ends 1/4" diameter hose
$34
The below larger diameter hose is only used if when you need a large hose to fit over the large inlet fittings on some torches. (You can get the smaller 1/4" hose listed above on these large inlet fittings with a bit of effort. A trick is to immerse the end of the hose in very hot water to soften the end.)
Order #
Length
Ends of hose - hose diameter
Price
T128
12 ft (3.7 meters)
Female "B" fitting one side and cut end of hose other side 3/8" diameter hose
$29.50
T258
25 ft (7.7 meters)
Female "B" fitting on both ends 3/8" diameter hose
$52.00
Y - Connectors for Hose
Y Connector - Connect this fitting at the output of the regulator and attach two hoses so you can use two torches from the same tank. Oxygen and propane Y are packaged and priced separately.
Y Connector with valves - Same as the Y connector described above except has two on/off valves, one for each hose.
Item#
Description
Output end
Input end
Price
101
Y hose connector (oxygen)
hose (B fitting)
Oxygen regulator
$19.50
102
Y hose connector (propane)
hose (B fitting)
Propane regulator
$19.50
111V
Y hose connector with valve (Oxygen)
hose (B fitting)
Oxygen regulator
$32.50
112V
Y hose connector with valve (Propane)
hose (B fitting)
Propane regulator
$32.50
* The FA30 connects between the regulator and the gas hose and is more commonly used.
Caps for "B" Size Hose
The safe and proper way to cap of the end of a fitting. Available for Oxygen and Fuel
Item#
Description
Price
927
Cap For "B" Size Hose-Oxygen
$3.95
928
Cap For "B" Size Hose-Fuel
$3.95
Flashback Arrestors
In some rare situations, a flame can travel back down a hose to the gas tank and cause an explosion.
This device helps prevent this reverse gas flow and flashback by using a reverse flow check valve and a flame arrestor.
Packaged and priced with both an oxygen and a propane arrestor.
Item#
Description
Output End
Input End
Price
Flashback Arrestors (pair of oxygen and fuel gas)
Connects directly to the regulator. This arrestor is the easiest to connect and the most popular.
Item #FA30
Male B size gas hose fitting
Female B size gas hose fitting
$56.00
Flashback Arrestors (pair of oxygen and fuel gas)
Connects directly to the fittings on a torch like the 3AB, 8M and Carlisle. We also include the fitting so you can put this arrestor in the middle of your twin hose. You may also need the A2 fittings listed below.
Item #FA10
Female B size hose fitting Male B size fitting using the included adaptor
Male B size hose fitting
$56.00
1/4" Barbed Hose Fittings for Torch
For use with torches that have B (screw on) fittings to accomodate cut-end hoses. Insert barbed fitting into cut end of hose and secure with included hose clamp. Be sure to check for leaks.
Item #A2
One side Female B size hose fitting
Other side a barb that fits in a 1/4" gas hose - use a hose clamp
$5.00
3/8" Barbed Hose Fittings for Torch
For use with torches that have B (screw on) fittings to accomodate cut-end hoses. Insert barbed fitting into cut end of hose and secure with included hose clamp. Be sure to check for leaks.
Item #A3
One side Female B size hose fitting
Other side a barb that fits in a 3/8" gas hose - use a hose clamp
$5.00
Oxygen and Fuel Gas Fittings
Allows you to connect a hose to another hose to make a longer hose (hoses need B size fittings)
Item #A30 (Oxygen) Item #A31 (Fuel)
Male B size gas hose fitting
Male B size gas hose fitting
A30 $1.50 A31 $1.50 ea
Note: Flashback arrestors have an arrow stamped on them to indicate the gas flow direction. Works in only one direction.
A2 optional, not always needed and are not included.
* The FA30 connects between the regulator and the gas hose and is more commonly used. Requires B size fittings on hose.
Four Functions in a single item.
A flashback arrestor
A quick connect and disconnect
An automatic shutoff valve
An internal reverse flow check valve all
Shorter and less expensive than if purchased separately. Combination Flashback Arrestor and Quick Connect Item# QDF30 - $89.00
Leak Detection Fluid
Item#
Description
Price
LT100
Leak Detection Fluid 4oz bottle
A must if you assemble your gas equipment. Use when connecting gas hoses, regulators, torches, flashback arrestors, quick connects, etc.
After tightening your fittings, pressurize your gas line. Then dribble a few drops on every fitting. If there is a leak, you will see bubbles at the leaky fitting. You may hear about using soap to check for leaks. It is VERY DANGEROUS! Many soaps have oil in it and oil + pressurized oxygen can be very dangerous. Google it! This liquid is specially formulated just for this purpose and is the only liquid you should use for checking gas leaks.
$6.95
Hose Quick Connects
Makes an easy job out of disconnecting and reconnecting your torch.
Disconnect your torch switching to a different torch or to put it away for safe keeping.
Great for quick classroom set up and take down.
Item#
Description
Input end is a
Output end is a
Price
QDB10
Quick Connects (pair)
Male B gas hose fitting
Female B fitting
$54
QDB20
Quick Connects (pair) usually used for hose to hose connection
Male B gas hose fitting
Male B gas hose fitting
$54
QDB30
Quick Connects (pair)
Female B fitting usually connects to Regulator
Male B hose fitting
$54
Manifold Gas System
Connect up to six torches to the same gas supply with this manifold system. Included are enough fittings and plugs to make 2 to 6 hose connections. Two manifolds are required, one for oxygen and one for propane. All Brass.
Custom Manifold Systems: We can help you figure out which parts you would need for your system and pre assemble for no extra charge. Systems might also include quick connects and flashback arrestors.
Item#
Description
Price
M6
Manifolds system, Includes 1 block, 7 fittings and 4 plugs - two required - specify Oxygen or Propane
$57.50
Item#
Description
Price
MB7
Manifold block only, works with oxygen or gas
$39.00
32
Extra Fitting - one side fits in the manifold block, other side fits a standard right handed thread oxygen "B" size hose fitting.
$1.50
33
Extra Fitting - one side fits in the manifold block, other side fits a standard left handed thread gas "B" size hose fitting. Gas fittings have a "line notch" stamped into the nut part of the fitting to identify it as left handed threading.
$1.50
P41P
Extra Plug - plugs unused outlets in the manifold block
$2.00
Manifold setup for 3 torches.
Manifold Splitters
Splitters allow you to run more than one regulator. If your running multiple torches off one tank this allows different pressures to each torch Click here for a better description and to see how they work.
Item
Description
Price
F271735
Propane Splitter with Check Valves. Run more than one Regulator
$32.00
T15
Propane Splitter. Run more than one regulator, no check valves
$39.00
Spark Lighter
Order#
Description
Price
1501
Used to light torches. Squeeze the handles together to cause a spark.
$3.00
Work Surfaces
For Torch Lampworking, Glassblowing and Glass Beadmaking
Propane Bottle Holder with Work Surface
Holds your disposable MAPP or propane bottle safely and at the correct angle for your torch . We recommend the
Hot Head Torch. Torch height is adjustable . Includes a built in tool and glass rod rest . All rust proof series 300 stainless steel . Holder holds both the wide and narrow shaped gas tank . Should be clamped or screwed to the table . Lower section is cut in to give you more leg room . Lower part that holds tank can be bent to adjust the torch angle . Torch and & nbsp; propane tank not included . Dimensions are approximate . Made in the USA
Description
Price
Propane / Mapp bottle holder and work surface
#1645
Holds both the narrow and wide style bottles.
9" x 14"
$24
Propane / Mapp bottle holder and work surface
#1650
Holds both the narrow and wide style bottles.
14" x 18"
Includes an 18" built on rod rest.
$39
Work Surfaces
Protect your work table. A comfortable pair of padded foam armrests and worksurface and rod rest all in one! All stainless steel. Pictured with a Minor Burner not included. Dimensions are usually close but can vary a bit - plus or minus a 1/2" or so.
Size
Description
Price
#1617 12"x 13"
Stainless Steel Work Surface - 12" x 13" flat area, heavy .030" thick metal. One edge is bent so you can wrap it over the edge of your work bench. The far edge is also bent up right so you have a nice 9" long rest for your colored glass rods.
$16
#1636 17" x 18"
Stainless Steel Work Surface - 17" x 18" flat area, heavy thick metal. Actually a bit smaller so we can fit it in a standard box. Front edge is bent so it fits nicely over the edge of your work table. The far edge is also bent up right so you have a nice 18" long rest for your colored glass rods.beige May need to be sent in it's own box.
$29
#1638 16" x 24"
Stainless Steel Work Surface - 16" x 24" flat area, heavy thick metal. Actually a bit smaller so we can fit it in a standard box. Front edge is bent so it fits nicely over the edge of your work table. The far edge is also bent up right so you have a nice 24" long rest for your colored glass rods.beige May need to be sent in it's own box.
$38
#1644 13" x 18"
Stainless Steel Work Surface - 13" x 18" flat area, heavy thick metal. Actually a bit smaller so we can fit it in a standard box. Front edge is bent so it fits nicely over the edge of your work table. The far edge is also bent up right so you have a nice 18" long rest for your colored glass rods.beige May need to be sent in it's own box.
$24
need new pic
#1659 16"x 30"
Stainless Steel work surface - actually 16" x 30" flat area, heavy thick metal. Front edge is bent so it fits nicely over the edge of your work table. The far edge is also bent up right so you have a nice 30" long rest for your colored glass rods. PLUS if this is shipped, it must go in it's own box.
$49
Accessories pictured not included.
Glass Rod Rests This movable rod rest is used to support glass rods to keep them up off the flame worker's workbench for easier grabbing, better organization, and to keep the glass rods cleaner. The rippled edge keeps the rods from rolling around. These durable stainless steel rod holders can also be placed inside a glass bead kiln to support your mandrels.
Item#
Descriptionbeige
Price
beige
#RRT8 - 8" Rod rest - fits inside 9" kilns or on your workbench
Volume Pricing Buy 1 6.00 Buy 2 $5.40 Buy 4 $4.80 Buy 8 $4.20
$6.00
Qty:
#RRT12 - 12" Rod rest - fits inside 13" kilns or on your workbench
Volume Pricing Buy 1 $9.00 Buy 2 $8.10 Buy 4 $7.20 Buy 8 $6.30
$9.00
Qty:
#RRT17 - 17" Rod rest - fits inside 18" kilns or on your workbench
Volume Pricing Buy 1 $11.00 Buy 2 $9.90
Buy 4 $8.80 Buy 8 $7.70
$11.00
Qty:
#RRT8T - 8" Rod Rest
Extra Tall for easy Grabbing
Volume Pricing Buy 1 $9.00 Buy 2 $8.10 Buy 4 $7.20 Buy 8 $6.30
$9.00
Qty:
#RRT12T - 12" Rod Rest
Extra Tall for easy Grabbing
Volume Pricing Buy 1 $12.00 Buy 2 $10.80 Buy 4 $9.60 Buy 8 $8.40
$12.00
Qty:
#RRT17T - 17" Rod Rest
Extra Tall for easy Grabbing
Volume Pricing
Buy 1 $14.00 Buy 2 $12.60 Buy 4 $11.20 Buy 8 $9.80
$14.00
Qty:
Difference between standard and tall rod rests.
Looking for something? Torches? Tools? Kilns?
Look in our index. Click on: Sitemap
Tool Caddy $28.00
Organize your bench top with this handy tool caddy
Copyright & ™ 2008
Sundance Art Glass.
All rights reserved. Sundance Art Glass, 6052 Foster Rd., Paradise, CA, 95969-3121, USA
Phone: 800-946-8452 | Phone: 530-872-3021
1501
beige
