Work Surfaces for Lampworkers and Glassblowers
Sundance Art Glass
All Torches Glassblowing Pyrex Pipemaking Lampworking Beadmaking Soft Glass & Hard Glass Nortel Carlisle National GTT Gas Equipment Oxygen Concentrators Torch Tips
Moretti/Effetre Soft Glass Borosilicate Hard Glass/Pyrex Bullseye Glass Dichroic Rods/Tubing Fusing Glass COE 33 COE 90 COE104
Moretti/Effetre Soft Glass Borosilicate/Pyrex Hard Glass Bullseye Dichroic Glassblowing Sculpture Boro
Fusing Bead Borosilicate Pyrex Pipemaking Glassblowing
Glassblowing Pyrex Pipemaking Lampworking Beadmaking Soft Glass Hard Glass Fusing Our Newsletter!
Lampworking Glassblowing Fusing Glass Bead casting
Lampworking Borosilicate Pyrex Glass Bead Soft Glass
Fusing Lampworking Beadmaking Glassblowing
For Fusing For Stained Glass
COE 90 Effetre COE 104 Borosilicate COE 33
Fusing Bead Lampworking Glassblowing Crucible Kiln Kiln Controllers Kiln Pyrometers Kiln Shelves and Posts
Lampworking Soft Glass Beadmaking GlassBlowing Hard Glass Pyrex Pipemaking


Need Your Order
in a Hurry?
For a fee of $10 your order goes ahead of regular orders. If your order is received before 10AM PST, 1PM EST we'll make every effort to see that it goes out the same day
click here to purchase

Sundance Glass
Over 40 years!

Unbeatable Pricing
Unbeatable Quality
Unbeatable Service
Unbeatable Selection


Click Here For Details





Work Surfaces

for
Torch Lampworking, Glassblowing and
Glass Beadmaking


Propane Bottle Holder with Work Surface Holds your disposable MAPP or propane bottle safely and at the correct angle for your torch. We recommend the HotHead Torch. Torch height is adjustable. Includes a built in tool and glass rod rest. All rust proof series 300 stainless steel. Holder holds both the wide and narrow shaped gas tank. Should be clamped or screwed to the table. Lower section is cut in to give you more leg room. Lower part that holds tank can be bent to adjust the torch angle. Torch and propane tank not included. Dimensions are approximate. Made in the USA

Description Price
Propane / Mapp bottle holder and work surface

#1645

Holds both the narrow and wide style bottles.

9" x 14"
$24

worksurface for lampworking glassblowing glass beadmaking Propane / Mapp bottle holder and work surface

#1650

Holds both the narrow and wide style bottles.

14" x 18"

Includes an 18" built on rod rest.
$39
click here to purchase

Work Surfaces


worksurface worksurfacw with torch
Dimensions are usually close but can vary a bit - plus or minus a 1/2" or so.
Size Description Price
Stainless Steel work surface for lampworking glass beadmaking and glassblowers #1617
12"x 13"
Stainless Steel Work Surface - 12" x 13" flat area, heavy .030" thick metal. One edge is bent so you can wrap it over the edge of your work bench. The far edge is also bent up right so you have a nice 9" long rest for your colored glass rods. $16
worksurface for lampworking glass beadmaking and glassblowing #1644
13" x 18"
Stainless Steel Work Surface - 13" x 18" flat area, heavy thick metal. Actually a bit smaller so we can fit it in a standard box. Front edge is bent so it fits nicely over the edge of your work table. The far edge is also bent up right so you have a nice 18" long rest for your colored glass rods. May need to be sent in it's own box. $24
work surface for lampworking glass beadmaking blassblowing #1636
17" x 18"
Stainless Steel Work Surface - 17" x 18" flat area, heavy thick metal. Actually a bit smaller so we can fit it in a standard box. Front edge is bent so it fits nicely over the edge of your work table. The far edge is also bent up right so you have a nice 18" long rest for your colored glass rods. May need to be sent in it's own box. $29
work surface for lampworking glass beadmaking blassblowing #1638
16" x 24"
Stainless Steel Work Surface - 16" x 24" flat area, heavy thick metal. Actually a bit smaller so we can fit it in a standard box. Front edge is bent so it fits nicely over the edge of your work table. The far edge is also bent up right so you have a nice 24" long rest for your colored glass rods. May need to be sent in it's own box. $38
work surface 1659
#1659
16"x 30"
Stainless Steel work surface - actually 16" x 30" flat area, heavy thick metal. Front edge is bent so it fits nicely over the edge of your work table. The far edge is also bent up right so you have a nice 30" long rest for your colored glass rods. PLUS if this is shipped, it must go in it's own box. $49

Accessories pictured not included.
Morretti Northstar Boroscilicate Pyrex Effetre colored glass rods resting and holding place. Durable, portable, stainless steel, can also go inside your glass bead sculpture kiln Glass Rod Rests
This movable rod rest is used to support glass rods to keep them up off the flame worker's workbench for easier grabbing, better organization, and to keep the glass rods cleaner. The rippled edge keeps the rods from rolling around. These durable stainless steel rod holders can also be placed inside a glass bead kiln to support your mandrels.

Item# Description Price
rod and tool rest #RRT8 - 8" Rod rest - fits inside 9" kilns or on your workbench
Volume Pricing
Buy 1 6.00
Buy 2 $5.40
Buy 4 $4.80
Buy 8 $4.20
$6.00

Qty:


tool and rod rest for lampworkers #RRT12 - 12" Rod rest - fits inside 13" kilns or on your workbench

Volume Pricing
Buy 1 $9.00
Buy 2 $8.10
Buy 4 $7.20
Buy 8 $6.30
$9.00
Qty:
tool and rod rest for lampworkers #RRT17 - 17" Rod rest - fits inside 18" kilns or on your workbench

Volume Pricing
Buy 1 $11.00
Buy 2 $9.90
Buy 4 $8.80
Buy 8 $7.70
$11.00
Qty:
tool and rod rest for lampworkers #RRT8T - 8" Rod Rest
Extra Tall
for easy Grabbing

Volume Pricing
Buy 1 $9.00
Buy 2 $8.10
Buy 4 $7.20
Buy 8 $6.30

$9.00
Qty:


tool and rod rest for lampworkers #RRT12T - 12" Rod Rest
Extra Tall
for easy Grabbing

Volume Pricing
Buy 1 $12.00
Buy 2 $10.80
Buy 4 $9.60
Buy 8 $8.40
$12.00

Qty:
rod and tool rest #RRT17T - 17" Rod Rest
Extra Tall
for easy Grabbing

Volume Pricing
Buy 1 $14.00
Buy 2 $12.60
Buy 4 $11.20
Buy 8 $9.80

$14.00
Qty:


glass-rod-rest-lampworking
Difference between standard and tall rod rests.


Tool Caddy

$28.00




Organize your bench top with this handy tool caddy.
Easily put away for quick clean up.
Also can be used in a kiln for a bead rest.
Stainless Steel. A 7" by 12" foot print

Tool Caddy
tool caddy



Register Account | Login
View Account | Logout
Shopping Cart
Secure Shopping
Secure Checkout
Search
Specials!
New Stuff And Sales!
Clearance Items!

Home | About Us | Store Locator | Wholesale Qualifications
Order | Employment Opportunities
Contact Us | Sitemap


Copyright & ™ 2008 Sundance Art Glass. All rights reserved.
Sundance Art Glass, 6052 Foster Rd., Paradise, CA, 95969-3121, USA
Phone: 800-946-8452  |